CVCO55CC-1581-1581

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Voltage Controlled Oscillators (VCOs), are circuits which produce a continuous stream of periodic output signals whose frequency depends on the voltages applied to their control inputs. One particular type of VCO mechanism commonly used is the capacitive-divider type. The CVCO55CC-1581-1581 VCO falls into this general category.

The CVCO55CC-1581-1581 VCO uses a capacitor divider circuit topology that includes two independent variable capacitors or varicaps along with various other components. These variable capacitors are typically implemented as variable air-gaps. When a variable voltage is applied to one of the variable capacitors, the capacitance of that particular electrode increases or decreases in proportion to the voltage applied. This results in the capacitor’s capacitance changing over a wide range. In the CVCO55CC-1581-1581, these two variable capacitors are combined in an RC network, forming an voltage divider that produces an output voltage that is a function of the two varicaps’ capacitance levels. This output voltage is then used to control the frequency of the VCO.

The CVCO55CC-1581-1581 VCO utilizes a low power BiCMOS process with monolithic device designs. This enables it to produce a wide frequency range while still maintaining a low power consumption. Furthermore, this enables the device to operate in either a linear or a non-linear frequency mode, producing a wide frequency range and low phase noise characteristics. The linear mode is typically utilized for a low frequency range and the non-linear mode for a high frequency range. A further benefit of the BiCMOS process is the ability of the device to operate over a wide supply voltage range.

The CVCO55CC-1581-1581 VCO can be used in a variety of applications that require a continuous stream of periodic output signal of a programmed frequency. These can include radio broadcast receivers, radio signal repeaters, satellite communication systems and quadrature oscillator circuits. The oscillator can also be used in driving active filters and operational amplifiers or in clock synchronization or signal detection. Furthermore, the VCO can be used as a source of sawtooth or sine wave signals.

In conclusion, the CVCO55CC-1581-1581 VCO is a versatile and reliable oscillator circuit that can be used in a variety of applications. It utilizes a low power BiCMOS process that enables it to produce a wide frequency range and low phase noise characteristics. The device’s variable voltage input also allows it to be programmed for a wide range of frequencies. The CVCO55CC-1581-1581 can be used for radio broadcast receivers, satellite communications, driving filters, and clock synchronization and signal detection, among many other applications.

The specific data is subject to PDF, and the above content is for reference