CW001150R0JE70

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through hole resistor (also known as a through hole component) is one of the most commonly used electrical components used in electrical and electronic circuits. It is a component that has two leads that can be soldered into a printed circuit board for electrical connections. Through hole resistors are available in various types and sizes with various resistance values.

The term Through Hole Resistor ( CW001150R0JE70 ) refers to a specific type of resistor, which is constructed with a cylindrical shape. It is made with two metal electrodes that are placed into the hole of the resistor to create a connection to the printed circuit board. The term is also used to describe Resistors that are used in printed circuit boards and not specifically the one mentioned above.

Application Field of CW001150R0JE70

The CW001150R0JE70 is suitable for use in a variety of applications, including power supplies, amplifiers, radio receivers, digital circuits, and other consumer electronic devices. It is also used in a wide range of industrial applications, including motor control, industrial machinery, and medical equipment. It is a reliable, cost-effective component that is often chosen for its simplicity, low cost, and high reliability.

Working Principle of CW001150R0JE70

The working principle of the CW001150R0JE70 involves passing a current through the resistive material, converting it into heat and dissipating it away from the resistor. This process regulates the flow of current in a circuit, limiting the current and stabilizing the voltage level. The CW001150R0JE70 is commonly used to protect other electronic components from over-voltages and other damage.

The CW001150R0JE70 is constructed with two metal electrodes placed into the hole of the resistor. These electrodes act as opposing points that resist the flow of current. The current is evenly divided between the two electrodes and the resistance of the CW001150R0JE70 is expressed in Ohms (Ω).

The working principle of the CW001150R0JE70 is based on Ohm\'s Law, which states that the current passing through a circuit is directly proportional to the voltage applied to it. The input voltage is measured in Volts (V) and the output current is measured in Amps (A). The current (A) is then multiplied by the resistance of the CW001150R0JE70 (Ω) to arrive at the voltage drop across the resistor.

The CW001150R0JE70 is used in many systems to control the current flowing in the circuit. It is often used to limit the current that is allowed to pass through the circuit so that it does not exceed a certain amount. This helps to protect the system and other components from damage caused by excessive current.

The CW001150R0JE70 is also an economical and reliable component. It has a long service life and can be used in a variety of applications. In addition, it is easy to install due to its simple construction and can be used in virtually any circuit.

The specific data is subject to PDF, and the above content is for reference