CW0051R600JE12HS

Series:	CW
Packaging:	Bulk
Part Status:	Active
Resistance:	1.6 Ohms
Tolerance:	±5%
Power (Watts):	6.5W
Composition:	Wirewound
Features:	Moisture Resistant, Pulse Withstanding
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.312" Dia x 0.875" L (7.92mm x 22.23mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through Hole Resistors are a type of resistor that is made up of two components: the resistor itself and a hole in the board itself. These are typically used in high density, low power applications where a larger size conductive material would not fit within the product design. Through Hole Resistors are available in a wide variety of sizes, styles and materials, allowing engineers to choose the right component for their needs.

CW0051R600JE12HS Through Hole Resistor

The CW0051R600JE12HS is a Through Hole Resistor that is designed to provide a high degree of performance in low-power applications. This particular resistor is a 0.5W rated part, meaning it is capable of handling up to 0.5 Watts of continuous power. The JE12HS package indicates that the part is 12mm high with a hole size of 0.5mm, making it possible to fit this component in even the tightest designs.

CW0051R600JE12HS Application Field and Working Principle

The CW0051R600JE12HS is designed to be used in a wide variety of low-power applications. Thanks to its small size, this component can be fit into applications that have limited space. These applications can range from anything such as automotive, appliance, industry, medical, consumer, or even small electronics. The working principle of the CW0051R600JE12HS is the same as most other resistors. This particular component is a voltage-dependent resistor, meaning that the resistance is determined by the applied voltage. The resistance of the resistor is determined by the amount of current that is allowed to pass through it. The amount of current is inversely proportional to the resistance of the resistor, so higher currents can flow through higher resistance values. The CW0051R600JE12HS Through Hole Resistor is a small, low-power component that is designed to fit in very tight designs. This component provides a high degree of performance in applications that require a low-power solution. Thanks to its small size and ease of installation, engineers can easily select this component for low-power applications such as automotive, appliance, industry, medical, consumer, and small electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description