CW005R6800JE73HS

Series:	CW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	680 mOhms
Tolerance:	±5%
Power (Watts):	6.5W
Composition:	Wirewound
Features:	Moisture Resistant, Pulse Withstanding
Temperature Coefficient:	±90ppm/°C
Operating Temperature:	-65°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.312" Dia x 0.875" L (7.92mm x 22.23mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of electronic component that is typically used in electrical circuits for measuring, controlling and regulating the current. The CW005R6800JE73HS is a through hole resistor that has a wide range of applications, from industrial to consumer electronics. It has a resistance of 0ohm to 68kohm and a tolerance of 5%.The CW005R6800JE73HS through hole resistor is a three-terminal, discrete component typically used for impedance matching, voltage division and current limiting. In addition to this, it is also used to produce a stable reference voltage and protect other components against surge currents.The CW005R6800JE73HS is available in several forms, with an appropriate one for all types of applications. It can either be axial, radial, pressed, molded, squared or custom designed. The main typical application of this through hole resistor is in audio circuitry, such as amplifiers, pre-amps, equalizers, and signal routing. It is also popular in other applications, such as power supplies, medical equipment, consumer electronics, and many other short-circuit and overload protection circuits.The functionality of the CW005R6800JE73HS through hole resistor is derived from its structure. It consists of an insulated substrate material that is cut into three parts: the base, collar and top. When assembled, the three parts together form a fixed and stable resistor. The inside of the resistor has a resistive surface, which is made out of either silver paste or carbon film. This surface will resist a certain amount of current flow depending on its composition and size. This current flow is then used to produce a regulated output voltage which is then used for a variety of purposes in electronics.A standard CW005R6800JE73HS through hole resistor contains a range of 5% that defines the amount of resistance that the component can offer within its set tolerance range. This range can be adjusted with resistors of different sizes and thicknesses available on the market. The resistance of the component is calculated by dividing the difference between the power and voltage drop of a direct current from its maximum and minimum values.In practical application, it is important to realize that the resistance level of a through hole resistor changes with the temperature and also performs differently within different resistance ranges. This is why it is important to use the correct size and rated for the application. It is even possible to use a higher rated resistor in some applications by adjusting the resistive layer of the resistor.In conclusion, the CW005R6800JE73HS through Hole Resistor is a versatile component used in many different circuits, with its main application being in audio circuitry. It is made up of three parts – the base, the collar, and the top, and has a resistive surface which is made from either carbon film or silver paste. It offers a resistance range of 0ohm to 68kohm, with a 5% tolerance. The resistance level of the component can be adjusted by adjusting the resistive layer, and the size and rated must be chosen according to the application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description