CW01020R00JE73HE

Through Hole Resistors

Through hole resistors refer to devices, which are placed in a hole in a printed circuit board (PCB) for the purpose of electrically connecting a component to the board itself. This type of resistor, also known as through-hole resistors, is most commonly used in the manufacture of circuits, particularly where there are high power dissipations or where heat transfer is important. Through-hole resistors can take the form of lead-less chip resistors, or may be physically connected to the PCB using screws or soldering technology.

The CW01020R00JE73HE through hole resistor is a lead-less chip resistor with a size of 1020 mils (25.403mm) by 4 mils (102.024mm) by 2 mils (50.8mm). The design of the resistor consists of a special alloy layer with thin metal film which is then etched into a pattern. The size and shape of the pattern depends on application and the type of resistor required. This type of resistor is typically used in high power dissipating applications because of its higher power rating. In difficult or extreme environmental conditions, the CW01020R00JE73HE is particularly suitable due to its high resistance to both impact and vibration.

The working principle of the CW01020R00JE73HE is based on a very simple concept. The resistance of a resistor is determined by its geometry, its construction materials and its composition. Resistance is defined as the opposition of a material to the flow of electric current. The resistance of the CW01020R00JE73HE can be varied by changing the geometry, the construction materials or by altering the composition of the resistor. For the CW01020R00JE73HE, the resistance is determined by the dimension of the resistor, the thickness of the resistive layer and the type of construction materials used. The value of the resistance can be adjusted by changing the thickness of the resistive layer or the type of materials used.

The CW01020R00JE73HE has a wide range of applications ranging from the automation and telecommunications industries, automotive and medical industries to radar systems. In the telecommunications industry the CW01020R00JE73HE can be used for the purpose of creating a more precise impedance matching, allowing for precise signal transfer between two points. In the medical industry, the CW01020R00JE73HE can be used to isolate circuits from faults such as currents generated by lightning strikes or accidental short circuits.

The CW01020R00JE73HE is a very reliable through hole resistor. It has a long life-cycle and is highly resistant to both temperature and humidity changes. The combination of these characteristics makes the CW01020R00JE73HE an excellent choice for applications where accuracy, reliability, high performance, and low power consumption are a must. Furthermore, its small size makes it suitable for applications in harsh or extreme environments.

In conclusion, the CW01020R00JE73HE through hole resistor is a reliable and durable device with a wide range of applications. Its size and construction make it suitable for applications which require high power dissipation and high precision accuracy. Its resistance is determined by the geometry, the construction materials used and the composition of the resistor. In addition, it has a long life-cycle, is highly resistant to temperature and humidity changes, and has a small size, making it suitable for applications in harsh or extreme environments.