CW01025K00KE733

Series:	CW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	25 kOhms
Tolerance:	±10%
Power (Watts):	13W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±30ppm/°C
Operating Temperature:	-65°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.375" Dia x 1.781" L (9.52mm x 45.24mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through hole resistors are an important type of electronic components that are used in circuit designs. The term “through hole” refers to the fact that in a typical circuit board, the components are soldered directly into the board through holes that are existing in the board. This type of resistor is used to control the current flowing through the circuit and to limit the voltage levels within the circuit.There are many different types of through hole resistors available, and each type works in a slightly different way. Generally speaking, however, each type of resistor works in a similar way. The basic idea behind them is that they have two terminals which are spaced apart on the same side of the resistor. These terminals are connected to either end of a resistive element, such as a wire or a metal film. This resistive element is then surrounded by insulation, such as a ceramic, paper, or plastic sleeve. The resistor then has some resistance value, measured in ohms, which is determined by the size and construction of the resistive element.

CW01025K00KE733 through hole resistor application and working principle

The CW01025K00KE733 is a through hole resistor that is designed to provide reliable performance and long service life when installed in electronic circuits. This particular resistor has a rated resistance of 10 ohms, and it can handle up to 25 watts. It is also suitable for high temperature environments, with a maximum temperature rating of 125°C.The working principle of the CW01025K00KE733 is fairly simple. The resistor is made up of two terminals which are spaced apart on the same side of the resistor. These terminals are connected to either end of a resistive element, such as a wire or a metal film. This resistive element is then surrounded by insulation, such as a ceramic, paper, or plastic sleeve.The current passing through the resistor encounters some resistance due to the fact that it needs to pass through the resistive element. This resistance is what allows the current to be regulated and the voltage levels to be limited within the circuit. The resistive element acts as a barrier between the two terminals, and it is responsible for the resistance flowing through the component. This is the working principle of the CW01025K00KE733 through hole resistor.

Conclusion

Through hole resistors are an important type of electronic component used in circuit designs. The CW01025K00KE733 is one example of a through hole resistor, and it is designed to provide reliable performance and long service life when installed in electronic circuits. Its working principle is based on the fact that it has two terminals which are spaced apart on the same side of the resistor and that these terminals are connected to either end of a resistive element. This resistive element is then surrounded by insulation, and it is responsible for the resistance flowing through the component, thereby allowing the current to be regulated and the voltage levels to be limited within the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description