CW252016-68NJ Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components with inductance on an electrical circuit. The CW252016-68NJ is a fixed inducer that is made with two concentric coils connected together to form a single coil. It is designed to have a nominal inductance of 68 nH, with a maximum of 76 nH and a minimum of 61 nH. The DC resistance is nominal at 0.1 ohm with a maximum of 0.11 ohm and a minimum of 0.09 ohm. This product is typically used in high-direct-current and high-frequency applications and requires a minimum inductance of 56 nH.

The CW252016-68NJ is an impregnated winding, and the winding is then sealed in an epoxy material. This makes the component hermetically sealed so that the inductance value remains constant over the life of the component. It is a high-performance, high-temperature-stable component with excellent reliability.

The working principle of the CW252016-68NJ is based on the law of inductance, which states that the voltage induced in a coil of wire is proportional to the rate of change of current in that coil. That is, an alternating current in the coil of wire creates a corresponding voltage. This principle is used to create the inductance necessary for the component to operate in its specific application. The CW252016-68NJ has a constant inductance value, which is determined by the number of turns of the coil, and the size and shape of the core. This value must remain constant for the component to work properly.

The CW252016-68NJ is usually found in power supply and RF applications because of its low DCR, high reliability and stable inductance. It is often used in switching mode power supplies, voltage regulators, signal filters, medical devices, telecom and computer equipment. It is also used in electrical noise reduction due to its high level of frequency stability. It is usually mounted with soldering, however, screw tightening and riveting can also be used depending on the requirements.

In conclusion, the CW252016-68NJ is a hermetically sealed fixed inducer with excellent performance, high temperature stability and a constant inductance value. It is widely used in power supply and RF applications such as switching mode power supplies, voltage regulators, signal filters, medical devices, telecom and computer equipment due to its low DCR, high reliability and stable inductance. It is usually mounted with soldering, however, screw tightening and riveting can also be used depending on the requirements.

The specific data is subject to PDF, and the above content is for reference