CWR26HB106MCFB\PR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are an essential part of electronic applications, and CWR26HB106MCFB/PR is one of the most commonly used ones in the industry. The device makes use of tarnishing to increase its efficiency and make it more reliable. It can be used in a wide range of applications, including industrial electronics and automotive electronics.

The working principle of a tantalum capacitor is based on a chemical reaction between a salt, such as ammonium chloride, and an anode, which is usually a solid conductive material, such as tantalum. When the anode and the electrolyte come into contact, a reaction takes place, resulting in the formation of sulphide on the anode. This oxide layer not only insulates the anode from the environment, but also acts as an additional layer of protection against failure due to long-term exposure.

The capacitor works by creating a charged electrical field between its two plates. As a result, an electrical charge is created between the two plates. This charge then creates an electric field, and this electric field is used as the voltage that drives current through the device. The electrical charge between the two plates is proportional to the capacitance of the capacitor, which allows for the device to be used in a variety of applications.

The CWR26HB106MCFB/PR is designed to have a capacitance of 100uF and a voltage of 6.3V. It is designed to work at a temperature range of -40 to + 85℃, making it appropriate for a variety of applications. The device has a dielectric strength of 16V RMS with a breakdown voltage of 20V RMS. The device is capable of dissipating heat up to 1.5W.

The device has a wide range of applications, which includes power supplies, LED lighting, and control circuits. It is used in computers, medical equipment, and telecommunications equipment, and can handle high power loads. The device is widely used in avionic, military, and space applications, where its robustness and reliability are extremely important.

The device has a high self-discharge rate and is resistant to wear, making it a good choice for long-term performance. In addition, the device is highly resistant to moisture, making it ideal for use in high humidity and corrosive environments. The device is also designed to have low levels of EMI and ESD, making it suitable for use in environments that require high levels of data integrity.

The device has a wide range of applications, but its most common uses are in industrial electrical, automotive electrical, and consumer electronics. In industrial applications, the device can be used to provide power to pumps, motors, fans, and other high-load electrical components. In automotive applications, the device can provide voltage to control circuits, radios, and lighting. In consumer electronics, the device can be used for audio devices, data storage, and other electrical components.

The CWR26HB106MCFB/PR is a reliable and robust device that can be used for a wide range of applications. Its wide range of application makes it suitable for a variety of applications, and its high self-discharge rate and robustness make it a good choice for industrial, automotive, and consumer electronics.

The specific data is subject to PDF, and the above content is for reference