CWR26MC106MCHC\PR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Tantalum Capacitors

Tantalum capacitors are electrical components used in various circuits and devices. They are small, have a low-profile, and can easily be integrated into different designs. These capacitors store electrical charges, act as filters to block noise and keep signals distinct, and also to filter signals. Made from tantalum, the technology can be found in almost every electronic device.

CWR26MC106MCHC/PR Application Field and Working Principle

CWR26MC106MCHC/PR Tantalum capacitors are widely used in a wide range of applications. With their small size, they are commonly used in portable devices such as cell phones and tablets, where they provide the ability to optimize performance and reduce circuit board space requirements. These capacitors provide the necessary charge filtering, due to their reliability, good low leakage current, as well as their ability to maintain specific capacitance levels over a wide range of input voltages.The CWR26MC106MCHC/PR has an Average DC Leakage Current of 50 A and an operating temperature range from -55°C to +125°C. The CWR26MC106MCHC/PR has a capacitance level of 10 µF, and a Rated Voltage of 6.3 Volts.

Tantalum capacitors use the principle of electrostatic charge storage to store electrical energy. This occurs when an electrical charge or electrical field is produced by voltage and is contained within a dielectric material such as the tantalum capacitor. The electrostatic energy is stored inside the capacitor until it is required, at which point the capacitor can discharge the energy to deliver the power needed.

Types of Tantalum Capacitors

Tantalum capacitors come in a variety of types, each for different applications. CWR26MC106MCHC/PR capacitors are known as Polarized which means they must be connected to the circuit in the correct polarity. This does limit the type of applications where they can be used.

CWR26MC106MCHC/PR Tantalum capacitors are not suitable for use in resonant circuits, as the parasitics associated with the capacitor may alter the resonance characteristics. They are also not suitable for high-frequency AC current applications due to their low-frequency characteristics. They also cannot be used in circuits where a large amount of current is required as they are limited in their current capability.

CWR26MC106MCHC/PR capacitors are for use in low-level digital and analog circuits where leakage and DC bias are not an issue, such as in input and output filters and in signal line bypass applications. They are also used to provide low levels of filtering for AC power and signal lines as well as providing power distribution and damping in certain circuits.

Conclusion

CWR26MC106MCHC/PR Tantalum capacitors are a type of capacitor which are widely used in many electronic applications because of their small size, high capacitance to volume ratio, and good low-leakage characteristics. Despite their limitations in high-frequency applications, they are ideal for use in low-level digital and analog circuits where leakage and DC bias are not an issue.

The specific data is subject to PDF, and the above content is for reference