CWR26MK106MCHC

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	C (0.01%)
Features:	Military
Manufacturer Size Code:	H
Lead Spacing:	--
Height - Seated (Max):	0.125" (3.17mm)
Size / Dimension:	0.285" L x 0.150" W (7.24mm x 3.81mm)
Package / Case:	2915 (7338 Metric)
Mounting Type:	Surface Mount
Lifetime @ Temp.:	--
Series:	Military, MIL-PRF-55365/13, CWR26
ESR (Equivalent Series Resistance):	500 mOhm
Type:	Conformal Coated
Voltage - Rated:	35V
Tolerance:	±20%
Capacitance:	10µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to CWR26MK106MCHC Tantalum Capacitor

Tantalum capacitors are a type of capacitor, with a positive terminal, or anode, and a negatively charged terminal, or cathode. The capacitors are made from an electrolytic solution of tantalum, as well as ceramic dielectric material. Tantalum capacitors are offer high volumetric efficiency and excellent capacitance stability over temperature and frequency, due to their construction from a thin dielectric layer between the anode and cathode.

Applications of CWR26MK106MCHC Tantalum Capacitor

CWR26MK106MCHC tantalum capacitors are used in a wide variety of applications, in particular in consumer, telecoms and medical applications involving circuit design. As these capacitors provide a high volumetric efficiency, they are used to compensate for the problems caused by a lack of board space in densely packed circuits. They can be used to maintain low ESR (equivalent series resistance) to reduce losses in power supplies, or to provide a predictable and stable capacitance over a wide range of temperatures and frequencies. They are also used to bypass high frequency signals to improve signal integrity.

Working Principle of CWR26MK106MCHC Tantalum Capacitor

The CWR26MK106MCHC tantalum capacitor is constructed of a tantalum anode with a ceramic dielectric material sputtered onto it, and a conductive layer as the negative terminal. The ceramic layer is then foil-etched on the anode side to create a capacitor. This is a polarised capacitor, meaning it must be specifically orientated when placed in a circuit. The anode reacts with the dielectric material to form a barrier between the cathode and anode, allowing current to flow from the anode to the cathode.When a voltage is applied between the anode and cathode, it creates an electrostatic charge stored in the capacitor, which causes current to flow based on the equation C=Q/V, where C is capacitance, Q is charge and V is the voltage. The capacitance then determines the amount of electricity that can be stored within the capacitor.

Conclusion

The CWR26MK106MHC tantalum capacitor is an excellent choice for applications requiring a reliable power source with predictable capacitance over a wide range of temperatures and frequencies. It is suitable for use in densely packed circuits, and can be used to compensate for the problems caused by a lack of board space by providing a high volumetric efficiency and stability over temperature and frequency. It also helps to reduce losses in power supplies and improve signal integrity by providing a stable capacitance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description