CY74FCT138CTSOC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CY74FCT138CTSOC is an integrated package model of logic, signal switches, multiplexers, decoders. An integrated circuit is like an entire circuit configuration, perfectly located on a single chip, reducing the size of the electronic circuit. CY74FCT138CTSOC is made up of tri-state logic circuits which allows signals to pass through whichever pin is activated and output in digital form. This chip can be used for applications like bus routing, fan-out buffer, and data line multiplexing.At the limit of a gate in CY74FCT138CTSOC, it functions as a selection gate. It has 4 output enable pins, each of which controls its own data line, and selects which input line is selected for output. When the enable pins are OFF, the output is disabled and open to allow the passing of high and low logic signals. With the enable pins ON, the input of the selected pin will be given to an output port as an output.CY74FCT138CTSOC also allows sections of data to be selected instead of individual lines. It takes the form of a 3-bit field decoder. This allows it to be used to activate a single output line out of 8 possible lines. The CY74FCT138CTSOC takes in an 8-bit TTL or CMOS Signals and converts it into a 3- bit TTL or CMOS signal. An address decode is then performed where 7 address bits are matched against 3-bit code and the matched output is enabled.The other feature of CY74FCT138CTSOC is that it is able to latch a signal at the output, based on input from the enable pin. This is done by storing the level of the output during the time when the enable pin is HIGH. This can come in handy when a cyclic logic signal needs to be generated. CY74FCT138CTSOC also has the ability to reduce reflections from a long line, thereby improving the integrity of the transmitted signal.CY74FCT138CTSOC is a great integrated circuit model that performs a wide range of functions. It allows signals to be routed over long distances while reducing reflections. It can select individual lines or data sections, and it can latch signals at output. It’s a great model for applications like bus-routing, fan-out buffers, and data line multiplexing.

The specific data is subject to PDF, and the above content is for reference