CZB06S04090075HRT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators have found wide application in a variety of industries, and few pieces of equipment are more commonplace in electronic systems than attenuators. The CZB06S04090075HRT is a general-purpose, broadband, variable RF attenuator designed specifically for the commercial, industrial, and automotive markets. It is a bi-directional attenuator that allows for continuous adjustment from full power (0 dB) to a minimum attenuation (93 dB) without the need for external switches or relays. The main components of this type of RF attenuator are a transmission line, an attenuation element, and a control element. The CZB06S04090075HRT operates using a modified Wilkinson power division network. This network utilizes the transmission line to divide the input power into two equal and opposite outputs. The output of one section is then attenuated by passing it through an attenuator element. The final output is a combined output from the two sections that is adjusted by the amount of attenuator element present in the circuit.

The main purpose of an RF attenuator is to reduce the level of a signal without altering its frequency or waveform. This allows for the accurate monitoring of a variety of signals and helps to ensure the signal remains true to its original form. The CZB06S04090075HRT is designed to be used in a variety of scenarios such as signal monitoring, signal mixing, signal level adjusting, and signal splitting. It can be used to adjust dynamic requirements of the system, or to reduce the effects of septation or interference.

The design of the CZB06S04090075HRT is very simple, yet it is still capable of providing excellent RF performance. The attenuator consists of a series of resistors connected in parallel across a coaxial cable. The resistors are designed in such a way that they attenuate the signal without affecting its frequency or waveform. The resistors are connected in series with the capacitors that provide the control voltage to change the resistance values. This arrangement provides a way to adjust the resistance values and adjust the attenuation of the signal as needed for various applications.

The CZB06S04090075HRT is designed for use in both commercial and industrial applications. It is capable of handling power levels up to 1 W and is suitable for signals between 25 MHz and 2.4 GHz. This type of attenuator is also very reliable, as it requires no external components to adjust the attenuation level. The CZB06S04090075HRT is an excellent choice for those looking for a reliable, flexible, and cost-effective RF attenuator.

The specific data is subject to PDF, and the above content is for reference