CZRF52C6V2-HF

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	6.2V
Tolerance:	±5%
Power - Max:	200mW
Impedance (Max) (Zzt):	10 Ohms
Current - Reverse Leakage @ Vr:	100nA @ 2V
Voltage - Forward (Vf) (Max) @ If:	900mV @ 10mA
Operating Temperature:	-55°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	1005 (2512 Metric)
Supplier Device Package:	1005/SOD-323F
Base Part Number:	CZRF52C6V2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - SingleThe CZRF52C6V2-HF is a type of diode that belongs to the family of Zenner diodes. It is a single type Zener diode which means that it consists of a single semiconductor junction. Zener diodes are devices which are used to regulate voltage and usually have a breakdown voltage rating. The CZRF52C6V2-HF diode has a nominal zener voltage of 6.2 volts and can handle peak forward voltage of up to 75V. It has an average reverse current of 200µA.The basic principle behind a Zener diode is that when it is connected to an external circuit, a voltage drop will occur across the diode. This voltage drop is dependent on the amount of current that is flowing through the diode. If the current is below a certain threshold, the diode remains in a non-conductive state and the voltage across the diode remains at a constant value. However, when the current through the diode is increased beyond the threshold level, the diode begins to conduct, allowing a current to pass through it and reducing the voltage. This process is known as zener breakdown.The primary applications of the CZRF52C6V2-HF diode include voltage regulation, over-voltage protection, noise reduction, and static elimination. It can also be used in linear regulators, switching power supplies, telecommunications, and consumer electronics.In a voltage regulation application, the CZRF52C6V2-HF diode is used to regulate the output voltage from a power supply. The diode is connected in series with a load and the power supply output is connected to the other side of the diode. When the voltage across the diode exceeds the nominal zener voltage, the diode starts to conduct, resulting in a voltage drop across the diode. This will result in a regulated output voltage from the power supply.In an over-voltage protection application, the CZRF52C6V2-HF diode is used to protect sensitive components in a circuit from accidental overvoltage. The diode is connected in series with the component that is to be protected. When the voltage across the diode exceeds the zener voltage, the diode will start to conduct, allowing a current to pass through the diode and reducing the voltage. This will protect the component from any accidental overvoltage.In a noise reduction application, the CZRF52C6V2-HF diode is used to reduce unwanted signal noise in a circuit. The diode acts as a filter and can reduce the amplitude of signal noise in a circuit.In a static elimination application, the CZRF52C6V2-HF diode is used to remove static charge in a circuit. The diode is connected in series with a resistor and the load. When the load is connected, a static charge will begin to build up and the diode will start to conduct, allowing a current to pass through the diode and reducing the static charge.The CZRF52C6V2-HF diode is a versatile device that can be used in many different types of applications. Its ability to regulate voltage and provide over-voltage protection makes it an ideal choice for many applications. Its small size makes it easy to install, while its high-temperature operation makes it suitable for a range of different operating conditions. Its low-power and low-noise characteristics make it suitable for use in a wide range of consumer electronics applications. Finally, its static elimination capabilities mean that it can be used in a wide range of static-sensitive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description