Allicdata Part #: | D2F-01F-A-ND |
Manufacturer Part#: |
D2F-01F-A |
Price: | $ 1.29 |
Product Category: | Switches |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | SWITCH SNAP ACTION SPDT 100MA |
More Detail: | N/A |
DataSheet: | D2F-01F-A Datasheet/PDF |
Quantity: | 1000 |
450 +: | $ 1.16341 |
Ingress Protection: | IP40 |
Mechanical Life: | 1,000,000 Cycles |
Electrical Life: | 30,000 Cycles |
Operating Position: | 0.217" (5.5mm) |
Operating Temperature: | -25°C ~ 65°C |
Overtravel: | 0.010" (0.25mm) |
Differential Travel: | 0.005" (0.12mm) |
Pretravel: | 0.020" (0.5mm) |
Release Force: | 5.099gf |
Operating Force: | 75gf |
Features: | -- |
Series: | D2F |
Termination Style: | PC Pin |
Mounting Type: | Through Hole, Right Angle |
Actuator Type: | Round (Pin Plunger) |
Voltage Rating - DC: | 30V |
Current Rating: | 100mA (DC) |
Switch Function: | On-Mom |
Circuit: | SPDT |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The D2F-01F-A snap action, limit switch is a device that provides a physical means to communicate an electrical state. Essentially, it is a switch made of a number of components that react to changes in the environment and provide a reliable and efficient system of control. The applications of this switch include, but are not limited to control systems, elevators, industrial automation, HVAC, and robotics.
The D2F-01F-A limit switch is composed of three primary parts, an actuator arm, a snap action contact, and a base. The actuator arm is connected to a contact. When the contact is triggered, the actuator arm transmits a signal to the base and the connection is made. This switch can be used as a two-position switch, meaning two separate connections are made when triggered, or as a three-position switch, with three separate connections.
The working principle of the D2F-01F-A limit switch is simple. A contact is made when the actuator arm is of certain size and shape. The motion of the actuator is limited by a threaded hole, while a spring tensioned to the base holds the actuator in place. When the contact is triggered, the actuator arm and the base move in response to the change in environment and the contact opens or closes. This forms the electrical connection between the two parts and completes the circuit.
The D2F-01F-A limit switch is a widely used industrial component. Its simple and reliable operation makes it an ideal choice for applications where precise and reliable control is required. Its flexibility and small size allow it to be used in tight quarters and difficult-to-reach areas. Additionally, it can be used to control a wide variety of systems, from heating and cooling systems to elevators, robotics, and industrial automation.
The D2F-01F-A snap action, limit switch is an incredibly useful device and has numerous applications. It can be used for precise and reliable control of industrial systems and can be found in a wide variety of applications. Its easy setup and operation make it an invaluable part of any control system, and its flexibility makes it suitable for a variety of uses. With the D2F-01F-A limit switch, you can be sure your electrical connections will be reliable and precise.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V