Allicdata Part #: | SW154-ND |
Manufacturer Part#: |
D2F-01L |
Price: | $ 1.24 |
Product Category: | Switches |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | SWITCH SNAP ACTION SPDT 100MA |
More Detail: | N/A |
DataSheet: | D2F-01L Datasheet/PDF |
Quantity: | 7668 |
1 +: | $ 1.12770 |
10 +: | $ 1.06470 |
25 +: | $ 1.02211 |
50 +: | $ 0.97952 |
100 +: | $ 0.93694 |
250 +: | $ 0.74529 |
500 +: | $ 0.68141 |
1000 +: | $ 0.66011 |
5000 +: | $ 0.59623 |
Series: | D2F |
Packaging: | Bulk |
Part Status: | Active |
Circuit: | SPDT |
Switch Function: | On-Mom |
Current Rating: | 100mA (DC) |
Voltage Rating - DC: | 30V |
Actuator Type: | Lever, Straight |
Mounting Type: | Through Hole |
Termination Style: | PC Pin |
Ingress Protection: | IP40 |
Features: | -- |
Operating Force: | 80gf |
Release Force: | 5.099gf |
Pretravel: | -- |
Differential Travel: | 0.020" (0.5mm) |
Overtravel: | 0.022" (0.55mm) |
Operating Temperature: | -25°C ~ 65°C |
Operating Position: | 0.268" (6.8mm) |
Electrical Life: | 30,000 Cycles |
Mechanical Life: | 1,000,000 Cycles |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Snap action, limit switches, such as the D2F-01L, are mechanical switches that manually open and close a circuit to control the flow of electricity through a system. They are often referred to as limit switches because they are used to limit or control the movement of a machine or device. The D2F-01L consists of a plunger that is depressed manually, which triggers a circuit, resulting in the switch closing or opening. It is a simple device composed of a single moving part, and no external power source is necessary for its operation.
The primary application field for the D2F-01L snap action, limit switch is to limit, or monitor the movement of a machine. The switch is typically installed alongside moving parts, such as pistons or other moving parts, to detect when a certain point of movement has been reached. When this point is reached, the switch will be triggered and the circuit will close or open, depending on the design of the switch.
The switch can also be used as an on-off switch, to control the flow of electricity within a circuit. In this type of application, the switch is typically wired in parallel with the circuit, so that when the switch is manually triggered the circuit closes, and electricity is allowed to flow through the system. When the switch is released, the circuit opens, and electricity does not flow through the system. This type of application is useful for controlling the flow of electricity to certain parts of a circuit, such as in an automated system.
The working principle of the D2F-01L snap action, limit switch is relatively simple. When the plunger is depressed, it triggers a switch, resulting in the circuit closing or opening. This is made possible thanks to two metal contacts inside the switch. When the plunger is depressed, it causes the metal contacts to touch, resulting in an electrical connection. The electrical connection then triggers the circuit, resulting in the switch either closing or opening.
The D2F-01L snap action, limit switch is a versatile and reliable switch, capable of controlling the flow of electricity in a variety of applications. It is a simple device, composed of just one moving part and no external power source, making it an ideal solution for limiting or monitoring the movement of a machine, or for controlling the flow of electricity in a circuit.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V