Allicdata Part #: | D2F-FL-T-ND |
Manufacturer Part#: |
D2F-FL-T |
Price: | $ 0.73 |
Product Category: | Switches |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | SWITCH SNAP ACTION SPDT 1A 125V |
More Detail: | N/A |
DataSheet: | D2F-FL-T Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.66011 |
Ingress Protection: | IP40 |
Mechanical Life: | 1,000,000 Cycles |
Electrical Life: | 30,000 Cycles |
Operating Position: | 0.268" (6.8mm) |
Operating Temperature: | -25°C ~ 65°C |
Overtravel: | 0.022" (0.55mm) |
Differential Travel: | 0.020" (0.5mm) |
Pretravel: | -- |
Release Force: | 2.039gf |
Operating Force: | 25gf |
Features: | -- |
Series: | D2F |
Termination Style: | PC Pin |
Mounting Type: | Through Hole |
Actuator Type: | Lever, Straight |
Voltage Rating - DC: | 30V |
Voltage Rating - AC: | 125V |
Current Rating: | 1A (AC), 500mA (DC) |
Switch Function: | On-Mom |
Circuit: | SPDT |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A snap action switch, also known as a snap switch, is a type of switch that operates in a snap-action, quick-make/quick-break fashion. Snap action switches provide rapid response time when compared to some other switch types, allowing them to be used in a variety of industrial and commercial applications, including door alarms, push buttons, vending machines, and arcade games. One of the more popular models is the D2F-FL-T, a limit switch designed for a wide range of applications.
The D2F-FL-T is a general purpose snap action switch, similar in design to other snap action switches. The switch consists of two parts – the snap-action actuator and the contact block. The actuator consists of an open frame, with a plunger extending from the center which interacts with an external force. When pressed, the firm tactile feedback lets users know that the switch has been activated. The contact block contains a single set of electrical contacts which open or close when the switch is operated.
The D2F-FL-T has several features that make it ideal for use in a wide range of applications. It can be activated with a minimum force of 3.2 ounces, making it suitable for applications where minimal force must be used. Additionally, the switch is rated up to 5 amps, allowing it to be used in applications where higher amperage is required. The switch is also designed to operate at a wide temperature range, from -40 to +50C.
The D2F-FL-T is designed to offer a reliable switching solution in a variety of conditions. The switch’s contact block has been designed to offer consistent electrical performance for up to one million cycles and still maintain an endurance rating of 25,000 cycles. Additionally, the switch has an ambient temperature rating of -40 to +85C.
The D2F-FL-T is designed to be used in a variety of industrial and commercial applications, including control panels, electric motors, vending machines, door alarms, and push buttons. It can be used to control the current flow in either AC or DC applications and is commonly used to control start/stop or timing operations. Additionally, the switch can be used in laboratory and test-bench applications.
To use the D2F-FL-T, the actuator must be pulled out and then released to activate the switch. When released, the actuator will snap back into place, allowing the contact block to open or close. This allows the switch to act as a limit switch, allowing it to be used to monitor the position of an item in a mechanical or electrical system by detecting when that item reaches a certain point or limit.
The D2F-FL-T is a versatile limit switch designed for a variety of industrial and commercial applications. By using a snap action switch, applications can be designed with minimal force and a wide range of temperatures. Additionally, the switch’s contact block can handle up to one million cycles and still maintain a long-term durability rating of 25,000 cycles, making it suitable for applications where high levels of endurance are required.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V