| Allicdata Part #: | SW1980-ND |
| Manufacturer Part#: |
D2FS-F-N-A |
| Price: | $ 0.71 |
| Product Category: | Switches |
| Manufacturer: | Omron Electronics Inc-EMC Div |
| Short Description: | SWITCH SNAP ACT SPST-NO 100MA 6V |
| More Detail: | N/A |
| DataSheet: |  D2FS-F-N-A Datasheet/PDF |
| Quantity: | 450 |
| 1 +: | $ 0.64260 |
| 10 +: | $ 0.60606 |
| 25 +: | $ 0.58187 |
| 50 +: | $ 0.55755 |
| 100 +: | $ 0.53336 |
| 250 +: | $ 0.42424 |
| 500 +: | $ 0.38788 |
| 1000 +: | $ 0.37576 |
| 5000 +: | $ 0.33939 |
| Ingress Protection: | IP40 |
| Mechanical Life: | 100,000 Cycles |
| Electrical Life: | 10,000 Cycles |
| Operating Position: | 0.276" (7.0mm) |
| Operating Temperature: | -20°C ~ 70°C |
| Overtravel: | 0.010" (0.25mm) |
| Differential Travel: | 0.005" (0.12mm) |
| Pretravel: | 0.020" (0.5mm) |
| Release Force: | 5.099gf |
| Operating Force: | 87gf |
| Features: | -- |
| Series: | D2FS |
| Termination Style: | PC Pin |
| Mounting Type: | Through Hole, Right Angle |
| Actuator Type: | Round (Pin Plunger) |
| Voltage Rating - DC: | 6V |
| Current Rating: | 100mA (DC) |
| Switch Function: | Off-Mom |
| Circuit: | SPST-NO |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Snap Action Limit Switches are a type of switch that has a pre-determined physical contact, giving it a snapping action when triggered. This type of switch is commonly used for security and safety-related applications, and can be used to activate alarms, activate lighting, open gates, control pumps and motors, and provide overload protection.
The D2FS-F-N-A is a snap action limit switch manufactured by Honeywell. It has a contact rating of 20A AC 125V 0.5HP and is UL, CSA, and VDE listing approved. It is also RoHS compliant and is suitable for use in severe environmental conditions. This switch is suitable for use in residential, commercial, and light industrial applications.
The body of the switch is made of polypropylene while the plunger is made of zinc alloy. It is resistant to corrosion, dust, dirt, and grease and is sealed against water and dust ingress. It is silver-plated, providing increased electrical and mechanical contact reliability.
The working principle of a D2FS-F-N-A snap action switch is simple. When a certain pressure is applied to the plunger, a mechanical mechanism is triggered that causes the contacts to “snap” into place. This causes the circuit to be closed and the load to be switched on. The strength and speed of the snap action is determined by the design of the switch and the actuating pressure applied.
In terms of application field, the D2FS-F-N-A switch is suitable for a wide variety of applications, including residential, commercial, and light industrial. It can be used in elevator override circuits, conveyor systems, automotive, machine tools, fire detection, and many other applications where a reliable snap action switch is required. However, it is not suitable for use in hazardous locations such as Class I Division 2, Group C and D areas due to its design.
In conclusion, the D2FS-F-N-A snap action limit switch is a reliable and durable limit switch suitable for residential, commercial, and light industrial applications. It features a rugged construction that is resistant to dust, dirt, grease, and corrosion, and is suitable for use in severe environmental conditions. With its simple mechanical design, it provides a reliable and cost-effective switching solution for many applications.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V