D2T-T1S

Ingress Protection:	IP40
Mechanical Life:	100,000 Cycles
Electrical Life:	100,000 Cycles
Operating Position:	0.173" (4.4mm)
Operating Temperature:	-25°C ~ 85°C
Overtravel:	0.030" (0.76mm)
Differential Travel:	--
Pretravel:	--
Release Force:	50gf
Operating Force:	330gf
Features:	--
Series:	D2T
Termination Style:	Quick Connect - 0.110" (2.8mm)
Mounting Type:	Chassis Mount
Actuator Type:	Round (Pin Plunger)
Voltage Rating - DC:	30V
Voltage Rating - AC:	125V
Current Rating:	5A (AC), 6A (DC)
Switch Function:	Off-Mom
Circuit:	DPST-NO
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The D2T-T1S snap action, limit switches are designed to perform various actions related to the sensing and control of equipment. This type of limit switch contains an electromechanical device capable of transferring signals to or from motion control or other devices. The use of this type of switch is becoming increasingly common in automated systems due to its ability to control processes within an automated system. In this article, we will discuss the general application field and working principle of the D2T-T1S limit switch.

Applications

The D2T-T1S limit switch can be used in many applications. It can be used to control valves or other motion control devices in a process or system, as well as to monitor or control the speed or position of a machine. This type of limit switch can also be used in robotics, in automated industrial systems, or in various manufacturing processes.The D2T-T1S limit switch is well suited for use in hazardous environments due to its sealed housing and dustproof construction. It is also designed to withstand high levels of shock and vibration, making it suitable for use in industrial applications.

Working Principle

The D2T-T1S limit switch is an electromechanical device that works by sensing when a piece of equipment has reached its maximum or minimum point and then sending a signal to indicate that point. This signal can be used to control the process or system, or to indicate when a certain process or event has occurred.The limit switch contains two terminals that are connected to the motion control device or other device that is being controlled. When the motion control device reaches its maximum or minimum point, the switch sends a signal that is detected by the motion control device or the other device. The signal can then be used to stop or start the desired process or action.When the limit switch reaches its maximum or minimum point, it will snap into place, resulting in a mechanical clicking sound. This sound indicates that the limit switch has reached its maximum or minimum point and is ready for the next action.

Conclusion

The D2T-T1S snap action, limit switch is designed to detect when a piece of equipment reaches its maximum or minimum point, and then to send a signal indicating that point. This type of limit switch is becoming increasingly common in automated systems due to its ability to control processes within an automated system. It is suitable for use in hazardous environments and is designed to withstand high levels of shock and vibration, making it suitable for industrial applications as well.

The specific data is subject to PDF, and the above content is for reference