D3433-5002-AR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The D3233-5002-AR is a rectangular connector, commonly referred to as a header with male pins. This type of connector is often used in electronic assemblies and typically serves as an interface for communication between two other components. It features a 2.5mm pitch which is the industry standard for wiring and an AR (Alignment Rib) polarized design which prevents it from being inserted incorrectly and potentially damaging the connected components.

This type of connector is offered in a variety of sizes, but the most common is the two-row combination having a pitch of 2.5mm, and a gap between rows of 0.8mm. The headers typically range from 10 to 40 positions and are available in both through-hole and surface-mount configurations. In addition, the pins may be either round or Square pins and are plated either with gold or Tin/Lead.

The D3233-5002-AR header contains two rows of pins which are mounted at a 90° angle to the board. The main benefit of this design is it allows for perpendicular stacking of multiple bulkhead connectors and reduces the board space needed for assembly. The pins are made of either copper or brass and allow for both power and signal connections. With a current rating of 1amp and a voltage rating of 50V, it makes it suitable for both low and high current applications.

The most common application of the D3233-5002-AR is for DC power connections. The polarized design ensures that the power is routed correctly and that the board will have proper protection against short circuits. It is also widely used in audio and video equipment, such as amplifiers, televisions and other consumer electronic hardware. The wide range of pin configurations allows for a variety of signals to be sent through the header, such as I2C, SPI and UART.

The working principle of the D3233-5002-AR is relatively straightforward. The header consists of a series of contacts, each with a copper sleeve and a pass-through slot which allows for signal or power to be routed from one side of the board to the other. The pins are connected to the circuitry of the board and are then soldered in place. This creates an electrical connection between the two portions of the board, allowing signals and power to pass through.

The D3233-5002-AR header is a versatile and cost-effective solution for a variety of different applications. It has a simple yet effective design and is widely used in both industrial and consumer electronic hardware. With a current rating of 1amp and a voltage rating of 50V, it is suitable for both low and high current applications. The wide range of pin configurations allows for both power and signal connections and the polarized design ensures proper protection and routing of the power.

The specific data is subject to PDF, and the above content is for reference