D3V-11G-2C4-K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap action, Limit switches are devices that are used for various control and monitoring functions in various electrical systems and devices. D3V-11G-2C4-K is one such switch, manufactured by Omron Corporation. It is a versatile switch and is used in a variety of applications.

The D3V-11G-2C4-K has a normally open basic construction and is fully gasketed – it is used in applications requiring electrical isolation, IP67 level of water resistance, and a wide coil range. The switch operates using snap-action contacts that open or close in response to an actuating force, such as pressure, temperature, or vibration. It is also pre-adjusted to perform with precise repeatability when the actuation force is applied.

The specifications of the D3V-11G-2C4-K Snap Action, Limit Switch are as follows: operating temperature of -40 to +55°C, operating pressure of 1.9N/mm², minimum carrying current of 5A, voltage rating of 250VAC/30VDC, maximum switching power rating of 350W, contact form of 1A/1C, total number of contacts of 2, and contact resistance of 50mΩ max.

The D3V-11G-2C4-K is primarily used in applications that require switching of an electrical load in response to an input. This could include, for example, the control of machine speed, flow rate, or pressure, or the control of temperature or liquid level. Other applications could include general motor control, solenoid valve control, and sensing of motor overload.

The working principle of the D3V-11G-2C4-K is based on a four-level switching system. When actuation force is applied to the switch, the contacts move to one of four different positions: normally open, single intermediate, double intermediate, or closed. This is done by applying a relatively low force to the switch – when actuating force is removed, the contact returns to its original state.

To use the D3V-11G-2C4-K, the switch must first be mounted onto the desired surface or environment. The connection cables should then be attached to the switch terminals and connected to the desired electrical application. Once all connections have been made, the switch can be tested to check its performance.

In summary, the D3V-11G-2C4-K is a versatile Snap action, Limit switch manufactured by Omron Corporation that is used in various electrical and control applications. It uses a four-level switching system, is IP67 rated water resistance, and has excellent repeatability. Installation and testing of the switch is relatively straightforward and does not require specialised knowledge or expertise.

The specific data is subject to PDF, and the above content is for reference