| Allicdata Part #: | Z7306-ND |
| Manufacturer Part#: |
D4N-8A62 |
| Price: | $ 31.93 |
| Product Category: | Switches |
| Manufacturer: | Omron Automation and Safety |
| Short Description: | SWITCH SNAP ACTION DPST 10A 120V |
| More Detail: | N/A |
| DataSheet: |  D4N-8A62 Datasheet/PDF |
| Quantity: | 3 |
| 1 +: | $ 29.03040 |
| 10 +: | $ 25.40160 |
| 25 +: | $ 23.22430 |
| 50 +: | $ 21.77280 |
| 100 +: | $ 20.68420 |
| 250 +: | $ 19.95840 |
| Ingress Protection: | IP67 - Dust Tight, Waterproof |
| Mechanical Life: | 15,000,000 Cycles |
| Electrical Life: | 300,000 Cycles |
| Operating Position: | 1.457" (37.0mm) |
| Operating Temperature: | -30°C ~ 70°C |
| Overtravel: | 0.197" (5.0mm) |
| Differential Travel: | -- |
| Pretravel: | 0.157" (4.0mm) |
| Release Force: | 82gf |
| Operating Force: | 510gf |
| Features: | -- |
| Series: | D4N |
| Termination Style: | Screw Terminal |
| Mounting Type: | Chassis Mount |
| Actuator Type: | Lever, Roller |
| Voltage Rating - DC: | 250V |
| Voltage Rating - AC: | 240V |
| Current Rating: | 3A (AC), 270mA (DC) |
| Switch Function: | On-Mom, Off-Mom |
| Circuit: | DPST-NO/NC |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The D4N-8A62 is a snap action, limit switch designed for use in a variety of applications. This switch is used to detect the presence of an object within a certain distance, or to actuate a circuit when the distance of the object changes. The limit switch is able to react quickly, providing an accurate and reliable response to an actuation signal.
The D4N-8A62 is a single pole, single throw switch. It is equipped with a fixed form-C contact that can be used to control or enable a device or circuit. It has an operating force of 4.5 N, a maximum travel of 1 mm, and a typical mechanical/electrical life of 100,000 operations. The contact can handle up to 250 V AC and 3 A at maximum. The switch has an IP rating of 67, meaning it is dust tight and protected from temporary immersion in water.
In terms of installation, the D4N-8A62 is usually mounted onto a flat, rigid surface using 4 screws. This is accomplished by drilling four 5 mm (0.20 in) holes into the mounting surface, then using the nuts and screws provided to secure the switch in place. It is recommended that the switch be mounted in an area where the environment is relatively dry and free of dirt or other contaminants.
The D4N-8A62 switch operates by sensing the movement of an object in its vicinity. When the object is within a certain distance, the contact of the switch is actuated and current flows through the circuit. This makes it ideal for use in applications such as sensors and locks. It can also be used to control devices such as valves in industrial environments, providing a rapid and accurate response to actuate the device or operate a circuit.
Overall, the D4N-8A62 is a useful snap action, limit switch especially when accuracy and reliability are key requirements. The switch is compact and lightweight, and its insulated housing provides good protection against environmental factors. It also has an IP67 rating for protection against dust and water. The switch can be used in a variety of applications, and provides an accurate and reliable response when an object is detected or moves within its specified distance limit.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V