D4S10A-1D5A5-B

Series:	*
Part Status:	Active
Lead Free Status / RoHS Status:	--
Moisture Sensitivity Level (MSL):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)

Coaxial connectors are invaluable components in almost any modern electronic system. They enable the transmission of data, energy, or a signal across two devices. This can be seen in a multitude of applications like engineering and manufacturing, broadcast and telecommunications, etc. In this article, we are going to discuss the application field and working principle of the D4S10A-1D5A5-B coaxial connector.The D4S10A-1D5A5-B is a SMA-type coaxial connector. It\'s rated up to 6 GHz and has an impedance of 50 ohm. Here are some applications of the connector:1. Broadband communications: The D4S10A-1D5A5-B is widely used in the broadband communications industry. It\'s popularly found in televisions, VCR\'s, satellite dish systems, digital home networking, and internet access.2. Engineering and manufacturing: It\'s commonly used in the engineering and manufacturing industries for production test, RF cable assembly, and prototyping.3. Testing: This particular type of coaxial connector is also used for cable testing, antenna testing, and various antenna measurements.Now let\'s look at the working principle of the D4S10A-1D5A5-B. The working principle of the SMA type of coaxial connector is very much similar to that of any other kind of coaxial connector. In essence, two plates of conductors are used, known as the center conductor & the outer conductor. In between these two plates of conductor, a dielectric material - usually an insulator - is used to separate the two. The center conductor is used to convey the radio frequency (RF) signal from one electronic device (or point) to another one.The outer conductor acts as a shield to eliminate and suppress any interference that might cause interference to the signal being transferred. At the same time, it also helps to keep the length of the center conductor constant. This is important as variations in the center conductor length will cause a change in the impedance, which will affect the performance of the RF signal being transferred. The outer conductor also helps to reduce losses and noise in the system.In conclusion, the D4S10A-1D5A5-B is an invaluable connector component in many applications, due to its compatibility with 6GHz frequencies. It is most often used in broadcast and telecommunications, engineering and manufacturing, as well as RF cable assembly and prototyping. The working principle behind the SMA-type of coaxial connector is relatively simple: two plates of conductors are separated by a dielectric material, where one conductor carries the signal while the other acts as a shield to reduce losses and noise.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description