Allicdata Part #: | D50AA30Z4-ND |
Manufacturer Part#: |
D50AA30Z4 |
Price: | $ 2.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | SMD ATTENUATOR |
More Detail: | RF Attenuator 30dB 50W |
DataSheet: | D50AA30Z4 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 1.81913 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Attenuation Value: | 30dB |
Power (Watts): | 50W |
Package / Case: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
D50AA30Z4 attenuators are a type of electronic device used to reduce the amplitude of a signal without significant loss of headroom. It functions as a voltage divider, allowing a portion of the input signal to pass through, resulting in an attenuated output signal. Attenuators are commonly used in audio applications to reduce the level of a signal, such as adjusting the volume of a microphone or signal processing system.
Application Field of D50AA30Z4
D50AA30Z4 attenuators are typically used in telecommunications and radio frequency applications. These devices can be used to reduce interference, control static, signal fading, or to protect equipment from over-voltage conditions. Attenuators are also used in measuring devices, such as spectrum analyzers or oscilloscopes, to reduce the input signal level so that it can be accurately measured.
Working Principle
D50AA30Z4 attenuators are passive devices that consist of two terminals, one of which is usually grounded, and two resistors. When an AC signal is applied to the device, the capacitance of the resistors causes the current flowing through them to be proportional to the frequency of the applied signal. This results in a decrease in the signal amplitude, with the amount of attenuation being determined by the ratio of the two resistors. The higher the resistance ratio, the greater the signal attenuation.
D50AA30Z4 attenuators are generally rated in decibels, which is a unit of measurement for relative changes in signal strength. A 3 dB reduction in signal strength would be represented as a -3 dB attenuation rating. These devices are generally stable over a wide range of signal frequencies and can achieve up to 50 dB of attenuation when used with high-value resistors.
Conclusion
D50AA30Z4 attenuators are widely used in radio frequency and telecommunications applications to reduce interference, control static, and protect equipment from overvoltage conditions. These devices can be used in measuring circuits to reduce the signal level before measurement, and are rated by their attenuation in decibels. D50AA30Z4 attenuators feature a two-terminal configuration and use two resistors with varying capacitances that allow for a range of signal attenuations.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
D50AA30Z4 | 2.0 $ | 1000 | SMD ATTENUATORRF Attenuat... | |
D50AA20Z4 | 2.0 $ | 1000 | SMD ATTENUATORRF Attenuat... | |
KJR-D50AN-DNIA-V2 | Altech Corpo... | 2.08 $ | 1000 | RING SENSOR HIGH SENS 06M... |
KJR-D50AN-DNIA-VE | Altech Corpo... | 2.08 $ | 1000 | RING SENSOR HIGH SENS 06M... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...