Allicdata Part #: | D5B100Y1A-ND |
Manufacturer Part#: |
D5B100Y1A |
Price: | $ 0.87 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | SMT RES THICK FILM 2% |
More Detail: | RF Attenuator ±2dB 0Hz ~ 3GHz 100 Ohms 5W |
DataSheet: | D5B100Y1A Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.78750 |
Series: | -- |
Part Status: | Active |
Attenuation Value: | -- |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 5W |
Impedance: | 100 Ohms |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
D5B100Y1A is a type of attenuator, a device which reduces the power of a signal. It is designed to be used in a variety of applications, including television, radio and telecommunication systems and is a valuable tool for engineers and technicians who will be using these systems.
An attenuator is a circuit that reduces the amplitude of a signal. It works by subtracting a small portion of the signal, which is then dissipated as heat. An attenuator typically provides a range of power levels, allowing the engineer to adjust the power according to their needs. In the D5B100Y1A, this range is 0 - 100 dB, which is more than usually required for most applications.
The D5B100Y1A can be used in a variety of applications. It is ideal for television, radio and telecommunications systems as the signal can be reduced to a range suitable for those applications. It can also be used as a signal pre-selector to reduce signal interference and to minimize crosstalk. In addition, it can be used for voice communication, wireless phone systems and other audio applications, as it allows for precise control over the signal strength.
The D5B100Y1A is designed to provide a reliable attenuation level. It uses a bridge-type circuit with two shunt and two series resistors. This configuration allows for very precise control over the output level and eliminates the need for manual adjustment, which is often necessary with simpler attenuators. The device is also constructed to be very durable, with a high shock and vibration rating.
The D5B100Y1A is also designed for efficient operation and minimal power consumption. It has a low insertion loss, which means that it does not significantly reduce the signal power. In addition, it provides a high return loss, which ensures that the device does not generate too much noise. This makes it suitable for use in high-performance systems.
The D5B100Y1A attenuator is an invaluable tool for engineers and technicians who are responsible for developing and maintaining television, radio and telecommunication systems. It allows engineers to precisely adjust the signal strength, thereby minimizing interference and eliminating crosstalk. Its high shock and vibration rating and low power consumption make it an economical solution and allow for reliable operation even in tough environmental conditions.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
D5B100Y1A | 0.87 $ | 1000 | SMT RES THICK FILM 2%RF A... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...