D5DA876M5K2P6-Z RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF diplexers are precision RF components used to separate and combine signals at different frequencies. A diplexer, also sometimes called a dualplexer, is a three-port, two-frequency device, allowing two radio signals, usually with different frequencies and bandwidths, to share the same antenna port.

The D5DA876M5K2P6-Z is a type of RF diplexer, specifically designed as a high performance planar diplexer for use in mobile and base station applications. This component is capable of handling frequencies ranging from 698 MHz to 960 MHz and 1710 MHz to 2170 MHz. This specific part is constructed by building two series coupled cavity filters, which are then connected to a resistor network.

The working principle of the D5DA876M5K2P6-Z is based on the use of the semi-lumped element filter technology. It is specifically designed with a balanced three-port structure, where the output ports 1 and 2 are connected to the input port 3, thus allowing the input signal to flow to both the output ports. This three-port structure functions as an open/closed circuit device for both forward and backward wave signal flow. The open/closed circuit is determined by the insertion and removal of the series coupled cavity filters.

The performance of the D5DA876M5K2P6-Z is determined by its ability to achieve a high level of isolation between 2 output ports. This is achieved by proper design of the RF diplexer, and the careful selection of series coupled cavity filters. The insertion loss of this component is also kept to a minimum, while providing a high level of isolation.

The D5DA876M5K2P6-Z is most often used in mobile and base station applications for the purpose of combining two high frequency signals into one. It can also be used to separate signals into two separate signals with different frequency ranges. This component is also used to help provide good signal isolation between transmit and receive paths.

In conclusion, the D5DA876M5K2P6-Z is a high performance RF diplexer which is capable of handling frequencies ranging from 698 MHz to 960 MHz and 1710 MHz to 2170 MHz. This particular diplexer is specifically designed as a planar diplexer, and utilizes semi-lumped element filter technology to achieve high levels of isolation between its output ports. Furthermore, it is most commonly used in mobile and base station applications for the purpose of combining two high frequency signals into one, and for providing good signal isolation between transmit and receive paths.

The specific data is subject to PDF, and the above content is for reference