D6RB1G960E1HB-Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Diplexers are devices used to remove signals in two distinct frequency bands from one signal path or send two different bands on one signal path. They can also be used to increase the isolation between two frequency bands and are often used to combine or split two satellite communication frequencies. The D6RB1G960E1HB-Z is a high performance RF diplexer designed for the 950-960 MHz frequency range.

The D6RB1G960E1HB-Z is typically used in applications that require a diplexer to increase isolation between two communication frequencies or split one path into two. Examples include satellite communications systems, radio frequency identification (RFID) systems, cellular base stations, and Wi-Fi systems. D6RB1G960E1HB-Z is used in cases where high isolation is required between 950-960 MHz and may be used as a filter, divider or combiner.

The D6RB1G960E1HB-Z consists of 3 components: a high pass filter, a low pass filter and a diplexer capacitor. The high pass filter consists of two resonators formed by stubs and a filter substrate. These two resonators form an LC network which acts as a bandpass filter to allow the frequencies above 950 MHz to pass, while blocking the frequencies below 950 MHz. The low pass filter consists of a single resonator and functions in the same manner, allowing the frequencies below 960 MHz to pass while blocking higher frequencies. The diplexer capacitor combines the two filtered signals to form a single composite signal.

The D6RB1G960E1HB-Z is capable of providing a high degree of isolation between two different frequencies while maintaining a very high level of signal quality. This isolation is achieved by the stepped impedance design of the filter. The high pass filter and low pass filter are connected in parallel and connected to the diplexer capacitor. The capacitor then provides defined steps in impedance to allow frequency separation. These impedance steps also cancel out any inductance or capacitance present in the signal, resulting in a very clean signal free of external interference.

In conclusion, the D6RB1G960E1HB-Z is an excellent device for providing high isolation between two distinct frequency bands while maintaining a high signal quality. The design is simple yet effective, and it is typically used in a wide range of applications such as satellite communication systems, cellular base stations, RFID systems, and Wi-Fi systems. The stepped impedance design of the filter also ensures that it is effective for blocking out any external interference, resulting in an overall clean signal.

The specific data is subject to PDF, and the above content is for reference