D75F-027.0M Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits that generate periodic waveforms. One example of this is the D75F-027.0M. This type of oscillator is known as a voltage-controlled oscillator (VCO) and is based on an integrated circuit (IC) designed to provide frequency control over a wide range of frequencies.

The D75F-027.0M is a highly stable VCO that is widely used in radio-controlled applications such as loran and sonar navigation systems, clock synchronization and automatic-control systems, as well as in RF and general-purpose signal-processing and control systems. The device operates from a 3.3V power supply and can provide a frequency range from 7.8 kHz to 26 MHz with very low spurious outputs. The frequency can be varied over a range of approximately 10:1 when the circuit is operated over the range of 3V to 30V.

The working principle of the D75F-027.0M is based on two main components: an operational amplifier (op-amp) and a voltage controlled attenuator (VCA). The op-amp is used to amplify, shape, filter and control the signal output from the VCO. The form of the output wave is determined by the gain of the op-amp and the amount of attenuation of the VCA. The frequency of output is proportional to the applied voltage, so, as the control voltage is increased the output frequency is also increased.

The advantages of using the D75F-027.0M compared with other types of oscillators include its low cost, high stability and low power consumption. The device is ideal for applications requiring narrow frequencybandwidths, low-noise operation, and tight frequency control. Furthermore, the D75F-027.0M is suitable for applications where size, weight and cost are of prime importance.

The D75F-027.0M is widely used in the fields of telecommunications, navigation, and radar. In communications systems, it is used for generating IF or clocking pulses or for frequency-swept modulation of the transmit frequencies. In navigation and radar systems, it can be used to generate ultra-stable frequency sources for signal modulation and reception. The device can also be used for precision metering, temperature control, and frequency division.

The specific data is subject to PDF, and the above content is for reference