DAC5574IDGSRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DAC) are a type of converter that can convert digital signals into analog signals. These converters have many applications, such as in computers, industrial systems, radio systems and consumer electronics. The DAC5574IDGSRG4 is a 16-bit Digital to Analog Converter which is designed for low-power, high performance applications. The DAC5574IDGSRG4 is a single-supply design that operates from 1.8V to 3.6V and takes a digital input (up to 16-bits) and converts it into an analog output.

The DAC5574IDGSRG4 is suitable for use in portable devices and can replace expensive optics or mechanical sliders in some applications. It can also be used in medical devices, industrial systems and consumer electronics, such as for audio and video. The DAC5574IDGSRG4 has a maximum conversion rate of 5MHz and is designed to minimize power consumption. The DAC5574IDGSRG4 is integrated with a built-in oscillator to work in the absence of an external clock. It also has an internal reference, that can be adjusted up to 1.5V or 2.5V levels.

The DAC5574IDGSRG4 has five operation modes including Power-down, Sleep, Active, Active ZERO and Active ZERO ZERO mode. The \'Active ZERO\' and \'Active ZERO ZERO\' mode is used to achieve zero output when no input is applied. In addition to this, the part has a pseudo-differential input for a better analogue output resolution. The DAC5574IDGSRG4 has a total extended temperature range from -40°C to 85°C.

The main purpose of a DAC is to convert a digital signal (represented as number of logic 0s and 1s) into an analogue voltage with an output range that is proportional to the digital input value. The DAC5574IDGSRG4 is designed to convert a 16-bit digital signal into a 0 to 2047mV analogue voltage, with a resolution of 1mV. The DAC has low output settling time and can drive up to 5mA into a load such as an Op-Amp or a filter.

The DAC5574IDGSRG4 has a very accurate output due to its precision reference and is designed to minimize power consumption as it is an TTL compatible device. The device has a voltage reference for better accuracy and stability and is integrated with non-volatile memory which stores the reference and configuration settings. It also has three serial communication interface options (I2C, SPI and UART) which can be used for configuration of the DAC and for reading the embedded temperature sensor.

The DAC5574IDGSRG4 is an excellent choice for applications that require low-power, high-accuracy and reliable analogue output. It is suitable for use in low-power embedded systems, portable systems, medical applications and industrial enclosures where a high performance DAC is needed. The device has features like low output settling time, low power consumption, wide output range and high resolution, accurate reference, and temperature sensor with interface communication options which makes it a good choice for applications that require analogue output and accurate voltage control.

The specific data is subject to PDF, and the above content is for reference