Allicdata Part #: | 553-2787-ND |
Manufacturer Part#: |
DASSPLIT3WNF |
Price: | $ 84.49 |
Product Category: | RF/IF and RFID |
Manufacturer: | PulseLarsen Antennas |
Short Description: | POWER SPLITTER, DAS 3-WAY, NPB |
More Detail: | RF Power Divider 698MHz ~ 2.7GHz |
DataSheet: | DASSPLIT3WNF Datasheet/PDF |
Quantity: | 22 |
1 +: | $ 76.80960 |
10 +: | $ 72.42200 |
25 +: | $ 68.03240 |
Series: | PIMinator™ |
Packaging: | Bulk |
Part Status: | Active |
Insertion Loss: | 5dB |
Frequency: | 698MHz ~ 2.7GHz |
Specifications: | -- |
Size / Dimension: | -- |
Package / Case: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF power dividers/splitters are widely used in many radio communication and radar applications which require dividing or splitting a signal to multiple paths. DASSPLIT3WNF is a type of RF power divider/splitter with a frequency range from DC to 3GHz.
DASSPLIT3WNF can be used in applications such as antenna testing, 5G networks, radar levelling, mobile base stations and software defined radio. This product is well known for its ability to provide accurate and consistent signal splitting and signal division over its frequency range. It is also a low-power device, meaning it consumes little power and does not require additional power to operate.
The DASSPLIT3WNF is a three-way, bidirectional power divider/splitter that splits the input signal into two paths. It is able to split the input signal equally into two paths, and can be adjusted to reduce power levels on one of the outputs. The split ratio can be adjusted from 1:1 to 1:b, where b is the number of outputs. In addition, the DASSPLIT3WNF can be used as a directional coupler to selectively measure signal power levels, monitor signal strength on each output and detect insertion loss.
The working principle behind the DASSPLIT3WNF is that it uses a series of resistors, capacitors and inductors to build a combination of low- and high-pass circuits to achieve the desired split and divide ratio. These components form a series of circuits that work in tandem to divide the input signal into two paths and eventually to the desired outputs.
The combination of these components ensures that each output has the same output power level, meaning that the signal is split equally into two paths. The signal is then fed to a set of oscillators to adjust the output power levels. A control circuit is also included in the DASSPLIT3WNF in order to adjust the output power levels in order to maintain the desired split ratio.
The DASSPLIT3WNF is a very reliable product capable of providing high performance and accurate signal splitting and dividing. It is easy to use and adjust, and has been widely used in a variety of radio communication and radar applications. It’s also relatively inexpensive compared to other similar products on the market.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
DASSPLIT2WNF | PulseLarsen ... | 69.52 $ | 27 | POWER SPLITTER, DAS 2-WAY... |
DASSPLIT3WNF | PulseLarsen ... | 84.49 $ | 22 | POWER SPLITTER, DAS 3-WAY... |
DASSPLIT4WNF | PulseLarsen ... | 86.53 $ | 4 | POWER SPLITTER, DAS 4-WAY... |
DASSPLIT2WDIN | PulseLarsen ... | 93.39 $ | 7 | POWER SPLITTER, DAS 2-WAY... |
IC BOOSTER/SPLITTER ANT 8-SOICRF Power D...
IC BOOSTER/SPLITTER ANT 8-SOICRF Power D...
POWER DIVIDER 8SOICRF Power Divider 1.65...
POWER DIVIDERRF Power Divider
IC DIVIDER PROGR LO NOISE 16-QFNRF Power...
IC DIVIDER X4 SIGE 8-MSOPRF Power Divide...