Allicdata Part #: | DBA500G-ND |
Manufacturer Part#: |
DBA500G |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | ON Semiconductor |
Short Description: | DIODE BRIDGE 1PH 50A 600V 4DIP |
More Detail: | Bridge Rectifier Single Phase Standard 600V Throug... |
DataSheet: | DBA500G Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tray |
Part Status: | Obsolete |
Diode Type: | Single Phase |
Technology: | Standard |
Voltage - Peak Reverse (Max): | 600V |
Current - Average Rectified (Io): | 50A |
Voltage - Forward (Vf) (Max) @ If: | 1.05V @ 25A |
Current - Reverse Leakage @ Vr: | 10µA @ 600V |
Operating Temperature: | 150°C (TJ) |
Mounting Type: | Through Hole |
Package / Case: | 4-Square, GBPC-W |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes - Bridge Rectifiers
A diode bridge rectifier, also known as a full-wave rectifier, is a type of rectifier that uses a bridge assembly of four diodes connected to its two AC inputs, in order to produce a single output waveform that is either direct current (DC) or a pulsating direct current. Diodes are semiconductor devices that allow electric current to flow in either direction, and when used within a bridge rectifier, they are arranged in such a way that they provide full-wave rectification. Thus, they are used to convert an AC voltage waveform into a pulsating DC voltage waveform, by allowing the current to flow only in one direction.
Diodes are extremely useful components, as they can act as a control element in a circuit, as well as rectifying an AC voltage waveform. They are also used as a protection element to protect a circuit from a current surge, acts as a temperature sensing device, or even controls the speed of a motor. The most common use for a diode bridge rectifier is for AC to DC conversion.
The DBA500G is a type of bridge rectifier designed to convert AC current into DC current. The DBA500G bridge rectifier is composed of four diodes in a bridge configuration, and it is moreover a full-wave rectifier, as it rectifies both the positive and negative half-cycles of the alternating current (AC) wave. This ensures that the rectified current contains more voltage than provided by a single diode rectifier. Additionally, the full-wave rectifier also provides a DC waveform with less ripple than that of a single-diode rectifier, which is vital in controlling current.
The DBA500G contains five pins or terminals, which include two AC input pins, two DC output pins, and one ground pin. The AC input pins are connected to the AC power source and the DC output pins are connected to the desired load. The ground pin is connected to the ground. When AC current reaches the connection point, the diodes in the configuration form a bridge and allow the electric current to move in either direction.
When the AC voltage across the bridge is of one polarity, the top-most diode will be forward biased, while the bottom-most diode will be reverse biased. When the polarity of the AC voltage is reversed, the situation is reversed. This causes the current to flow in a single direction, and eliminates the possibility of reverse current. As a result, the continuous sinusoidal wave of the input AC voltage will be converted into a pulsating DC voltage.
The DBA500G uses its four diodes to convert the AC current into DC current. The diodes act as switches and close when the voltage reaches a certain level, allowing current to flow through the bridge. The current that is converted to DC current is the average current in the circuit, and will be either positive or negative depending on the polarity of the AC voltage wave.
The DBA500G is an extremely efficient bridge rectifier and is used in many applications. It is frequently used to rectify AC mains voltage, as well as integrated circuit power supplies. It is also used to regulate the output of DC/DC power supplies and to provide a constant DC voltage level in DC motor controls. The DBA500G is often used in automotive and industrial applications such as welding, power supplies, and solar power systems.
The DBA500G is a versatile and reliable bridge rectifier and is used in a wide range of applications. It is composed of four diodes arranged in a bridge formation, and it is used to convert AC current into a pulsating DC voltage waveform. It is efficient and commonly used for AC/DC power supplies and DC motor controls. The DBA500G is a great choice for industrial and domestic applications, and can provide an efficient and reliable AC current rectification.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
DBA5W5SF0 | ITT Cannon, ... | 2.56 $ | 2500 | DSUB 5W5 F CRIMP G A183Re... |
DBA5W5PF0 | ITT Cannon, ... | 2.82 $ | 2048 | DSUB 5W5 MPlug for Male C... |
DBA5W5SA197FO | ITT Cannon, ... | 5.01 $ | 225 | CONN COMBO-D 5W5 RCPT HSG... |
DBA5W5SA101F0 | ITT Cannon, ... | 7.69 $ | 2594 | DSUB 5W5 F CADReceptacle ... |
DBA52CM24 | Carlo Gavazz... | 0.0 $ | 1000 | DELAY ON RELEASE TIMERTim... |
DBA500G | ON Semicondu... | 0.0 $ | 1000 | DIODE BRIDGE 1PH 50A 600V... |
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...