Allicdata Part #: | DC-N2S-170-S-10-ND |
Manufacturer Part#: |
DC-N2S-170-S-10 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Digi International |
Short Description: | NETWORK ETH CTLR N2S-170 10PK |
More Detail: | N/A |
DataSheet: | DC-N2S-170-S-10 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | 0.00000 |
Series: | -- |
Part Status: | Discontinued at Digi-Key |
Lead Free Status / RoHS Status: | -- |
For Use With/Related Products: | -- |
Moisture Sensitivity Level (MSL): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-N2S-170-S-10 is an accessory for radio frequency (RF) applications. It works in a wide range of radio frequencies and can be used to measure and tune the wavelength of an RF signal. This makes it suitable for applications such as radio monitoring, broadcast transmission, wireless LANs, satellite communication, microwave communication links, and more.
The DC-N2S-170-S-10 is a splitter that allows a single RF signal to be split into two independent signals. It features an isolation of -50 dBm with a return loss of better than 10 dB. It is capable of handling up to 4 kW of sustained power. Moreover, it supports frequencies ranging from 2.5 – 1000 MHz.
The RF splitter is connected between the transmitter and the antenna. The antenna side is connected to the output of the splitter. The splitter then divides the signal before sending it to the two separate antennas. This allows for two independent antennas to be used, which improves the signal-to-noise ratio and reduces interference. It also allows for two signals with different frequencies to be sent from the same single input.
The splitter also has two different types of outputs. The first is the “direct output,” which passes the signal through without any alteration. This can be used to power an amplifier or other device that requires a consistent signal. The second output is the “attenuated output,” which reduces the amplitude of the signal before sending it to the antenna. This can be used to send weaker signals to the antenna, which can then be boosted to reach farther distances.
The DC-N2S-170-S-10 splitter is a great way to power two independent antennas with the same signal. It allows for increased signal coverage, better signal strength, and less interference. It is an economical and easy-to-use solution for RF applications.
The specific data is subject to PDF, and the above content is for reference