DC4759J5020AHF RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional couplers are components that sample the acoustic power signal of a single RF port and direct it to another port at a pre-determined level. This allows for measurements of parameter such as gain, losses, and differences between two ports to be made. The DC4759J5020AHF is an example of such a coupler, it has a frequency range from DC to 3 GHz and can provide up to 18 dB of signal isolation. Its small size and low-cost make it an ideal component for a variety of applications.

The DC4759J5020AHF has three primary ports: input, output, and sample. The input port is where the primary RF signal is input to the coupler, while the output port provides a signal equal to the input but with a predetermined attenuation level. The sample port then provides a low-level signal proportional to Wthe input signal. The device’s operating frequency range and specifications are detailed in the product data sheet.

In a typical application, the DC4759J5020AHF is used to sample the RF signal at the input port and then direct it to the output port at a predetermined level. The sample port can then be used to measure the signal level of the input without having to connect the output directly to the signal measuring device. This can be useful for monitoring critical parameters or measuring static gains within an RF system.

The DC4759J5020AHF is also used in attenuating the signal from the input port. This can be used to control the strength of a signal over its transmission path and to better manage noise or distortion in an RF system. The same device can also be used as an isolator on the output side of the system to provide protection against over-voltage or other transient effects. In this case, the input signal is reduced by a predetermined amount prior to being directed to the output.

The DC4759J5020AHF is ideal for applications requiring a broad frequency range and good signal isolation. It can provide up to 18 dB of signal isolation across its frequency range and its small size and low cost make it an attractive choice for a variety of applications. It is also designed to withstand high RF power levels on the input port, allowing it to be used in high-power systems.

In summary, the DC4759J5020AHF is a RF directional coupler with a frequency range from DC to 3 GHz and a maximum signal isolation of 18 dB. It can be used in a variety of applications ranging from signal monitoring and attenuation to isolator protection. Its small size and low-cost make it an ideal component for a variety of applications.

The specific data is subject to PDF, and the above content is for reference