DC60SA5-B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are an innovative form of relays, in which the output leads are connected to the control switch without the use of mechanical contacts. A typical SSR consists of a main section, the relay channel, and a control section; the control section controls when and how much relay current passes through the channel. The DC60SA5-B is one example of an SSR in the form of a solid state relay module. This article will discuss the application field, and the working principle, of the DC60SA5-B SSR.

Application Field Of DC60SA5-B

The DC60SA5-B SSR module is a type of solid state relay device that switches between two different loads. It is one type of plug-in module designed for a wide range of applications. This type of SSR is designed for use with voltage levels of up to 15 or 30 volts DC, depending on the user’s requirements. Additionally, the DC60SA5-B SSR module is capable of controlling both AC and DC loads, and provides both normally-open and normally-closed contact arrangement, with a current rating of up to 5 amps. Due to its versatility and ease of use, the DC60SA5-B is an ideal choice for systems that require complex and reliable control of multiple loads.

Working Principle Of DC60SA5-B

The DC60SA5-B SSR module incorporates a micro-controller based on a zero-cross concept, meant to ensure that only when the supply voltage reaches a threshold level, the output switch will be activated. Depending on the user’s choice, this module can be programmed to be either normally-open or normally-closed. As far as the control section is concerned, the module contains a built-in circuit board with an NPN transistor for the signal input, a zener diode, opto-isolator for electrical isolation, and a bipolar transistor for switching operations.

The relay channel incorporates two components, the primary, and the secondary. The primary consists of a disc ceramic material, with a built-in resistor to control the response time of the relay, and a printed circuit board which supports the coil. The secondary, on the other hand, contains the switch contacts with an operating voltage of up to 30 volts (depending on the user\'s requirements). The two components work together, the primary being used to generate an alternating magnetic field which activates the secondary. The output switch is then triggered by the secondary, thus switching the load on or off.

Conclusion

In conclusion, the DC60SA5-B SSR module is a user-friendly device designed for a wide range of applications. This device offers versatility, ease of use and reliability, making it an ideal choice for systems that require complex and precise control of two separate loads. On top of this, the DC60SA5-B’s working principle, which incorporates two components, the primary and the secondary, is relatively easy to understand.

The specific data is subject to PDF, and the above content is for reference