Allicdata Part #: | DC947A-ND |
Manufacturer Part#: |
DC947A |
Price: | $ 89.25 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Linear Technology/Analog Devices |
Short Description: | BOARD EVAL FOR LT3740EDHC |
More Detail: | LT3740 - DC/DC, Step Down 1, Non-Isolated Outputs ... |
DataSheet: | DC947A Datasheet/PDF |
Quantity: | 2 |
1 +: | $ 80.32500 |
Series: | -- |
Part Status: | Active |
Main Purpose: | DC/DC, Step Down |
Outputs and Type: | 1, Non-Isolated |
Voltage - Output: | 1.8V |
Current - Output: | 10A |
Voltage - Input: | 3 V ~ 15 V |
Regulator Topology: | Buck |
Frequency - Switching: | 300kHz |
Board Type: | Fully Populated |
Supplied Contents: | Board(s) |
Utilized IC / Part: | LT3740 |
Base Part Number: | LT3740 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The DC947A evaluation board is one of the many evaluation boards that are available on the market. It is classified into the category of Evaluation Boards - DC/DC & AC/DC (Off-Line) SMPS. These evaluation boards are designed to provide the necessary functions to evaluate and adjust DC/DC and AC/DC (off-line) switched-mode power supply (SMPS). This article will discuss the application fields and working principle of the DC947A evaluation board.
The DC947A evaluation board is designed to act as a digital signal processor (DSP) and interface to external circuits and synthesize modulating signals used for off-line DC/DC and AC/DC switched-mode power supplies. This board is designed to allow the evaluation of the performance of power supply components and to allow adjustments of the power supply\'s control algorithms and operating frequencies. Additionally, this board also enables applications for testing the response of the power supply to transient and dynamic loads.
The AC/DC switched-mode power supplies are used for incorporating more effective and efficient voltage and current control in the power supply modes. Therefore, the DC947A evaluation board is the ideal tool for evaluating the performance of low-noise power supplies, as well as testing transient and dynamic loads. Additionally, the on-board DSP and the real-time modulations enable the debugging of frequency control loops and power supply transient response.
For evaluation and debugging purposes, the DC947A evaluation board can be operated in different modes. It can be programmed to operate in either of the off-line or open-loop modes. In the off-line mode, the modulated pulses from the DSP are generated for voltage and current control without any external signals required. The DSP further enables synchronous detection, over-current protection, and other protection circuits required for proper operation of the evaluation board. On the other hand, in the open-loop mode, the DC/DC and AC/DC switched-mode power supplies can be adjusted via external signals, such as the input voltage signal and the reference current signal.
When operating in the open-loop mode, the DC947A evaluation board allows for the adjustment of the input duty cycle, because of the flexibility of the modulation signals. Change in the modulated pulses allows the adjustment of the power supply\'s output voltages and currents. Furthermore, the evaluation board also allows for the incorporation of the Mean Time To Failure (MTTF) analysis. This analysis allows the user to calculate the expected lifetime of the system based on the operating conditions, including load variations, temperature drift, and operating voltages.
The DC947A evaluation board is also designed to provide a comprehensive suite of safety and overload features to ensure safe operation. These safety and overload features include an over-voltage protection circuit, an over-current protection circuit, a temperature sensor, and a fault isolation circuit. Additionally, the evaluation board allows for programmable over-current protection levels, which can be adjusted to protect the system from overloads.
In conclusion, the DC947A evaluation board is designed for the evaluation and debugging of power supplies. It enables applications that can effectively and efficiently evaluate and adjust DC/DC and AC/DC switched-mode power supplies. Using the DSP and real-time modulations, the board also enables the debugging of frequency control loops and power supply transient response. Additionally, it is also designed to provide a comprehensive suite of safety and overload features, including over-voltage protection and over-current protection circuits. The evaluation board therefore is essential in evaluating and adjusting the performance of power supplies, and ensuring their safe operation.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
DC949A-A | Linear Techn... | 119.12 $ | 3 | BOARD DEMO FOR LT3478EFE-... |
DC949A-B | Linear Techn... | 119.12 $ | 1000 | BOARD DEMO FOR LT3478EFEL... |
DC941A | Linear Techn... | 35.7 $ | 3 | BOARD DELTA SIGMA ADC LTC... |
DC947A | Linear Techn... | 89.25 $ | 2 | BOARD EVAL FOR LT3740EDHC... |
DC948A | Linear Techn... | 35.7 $ | 3 | EVAL BOARD FOR LTC2926LTC... |
EVAL KIT FOR ACT4060ASH-TACT4060A - DC/D...
BOARD EVAL OFFLINE CTLR NCP1337ANCP1337 ...
BOARD EVAL POE FOR SI3402Si3402 - Specia...
EVAL BOARD FOR DCM24AP150T320A50DCM24AP1...
BOARD EVALUATION LM3670MF-1.5LM3670 - DC...
EVAL BOARD QUASI RES 15WVIPER35HD - AC/D...