DCM3623T50M04A2M00

Current - Output (Max):	36.4A
Supplier Device Package:	--
Size / Dimension:	1.52" L x 0.90" W x 0.29" H (38.7mm x 22.8mm x 7.3mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	89.2%
Operating Temperature:	-55°C ~ 125°C
Features:	OCP, OTP, OVP, SCP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	2.25kV
Power (Watts):	120.1W
Series:	VI Chip® DCM®
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	3.3V
Voltage - Input (Max):	50V
Voltage - Input (Min):	16V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to DCM3623T50M04A2M00

DCM3623T50M04A2M00 is a DC-DC converter, manufactured by Sin-Tec Electronics. It is a switching mode device which converts an input voltage to the desired output voltage at a higher power efficiency. This device is being used in numerous applications ranging from medical instruments, aerospace systems, industrial automation, consumer electronics and many other applications.

Applications

DCM3623T50M04A2M00 is used to boost or convert the supplied voltage to a higher or lower voltage as needed by the application. This device is capable of performing both buck (down conversion) and boost (up conversion) conversions with a nominal switching frequency of 50 KHz. It is suitable for applications ranging from 12V-24V input, and 5V-18V output range.The device provides multiple protection features, such as over voltage protection, over temperature protection, over current protection, and short-circuit protection. These features make the device suitable for medical instruments where safety is critical.DCM3623T50M04A2M00 is mainly used in industrial automation, where it is used to power robotic automation systems, sensors, and other electronic components. Other applications where the device can be used include automotive systems, telecommunication systems, surveillance cameras, and LED lighting systems.

Working Principle

DCM3623T50M04A2M00 is based on a switching regulator topology which uses an inductor, a capacitors, and a few other components to regulate the output voltage. The output voltage is regulated by the switching controller, which senses changes in the output voltage and turn the intervening switching elements ON or OFF depending on the requisite current.When the device is turned ON, a switch turns ON, which causes current to start flowing through the inductor. This results in the buildup of magnetic energy in the inductor. As the switch is turned OFF, the magnetic energy stored in the inductor is released, which charges the output capacitor, converting it in to the desired output voltage.

Conclusion

The DCM3623T50M04A2M00 is a versatile dc-dc converter used in a number of applications. Its applications include medical, automotive, and industrial automation, wherein it is used to step-up or step-down input voltages. Its working principle, an inductor based buck-boast switching regulator, makes it an efficient and reliable device for delivering required output voltages in an efficient manner.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description