DD170N16SHPSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DD170N16SHPSA1 is a bridge rectifier diode, a type of diode which rectifies alternating current and is composed of two diodes connected in antiparallel. A bridge rectifier diode has a range of applications, including use in other electronic components like rectifier filters, power supplies, and voltage regulators. It is also used for charging automotive and stationary batteries.

A bridge rectifier diode has a very simple structure consisting of four diodes connected in a loop that forms a rigid bridge. This bridge rectifier diode transfers current from the input source to the load while at the same time eliminating the AC component of the current. The four diodes are arranged so that two of them are forward-biased and two of them are reverse-biased, thus allowing the AC current to be rectified in both directions.

The bridge rectifier diode has several advantages over the other rectifier circuits since the bridge rectifier dissipates less power and can provide full-wave rectification with minimal distortion. The bridge rectifier diode is also cheaper and occupies less circuit board space than the other rectifier circuits. Furthermore, the circuit can be implemented without an external transformer.

The DD170N16SHPSA1 bridge rectifier diode can handle a maximum forward current of 16A and a maximum DC reverse voltage of 170V. It is a high-power semiconductor device with an average forward current at 23A and a peak reverse voltage of approximately 200V. The device also has a high surge capability, allowing it to withstand short-term overloads.

The bridge rectifier diode works by rectifying alternating current and converting it into direct current. When a sine wave is applied to the center terminals of the bridge rectifier, two of the diodes become forward-biased and allow the current to flow from the anode to the cathode. The other two diodes are reverse-biased and prevent current from flowing from the cathode to the anode. In this way, the bridge rectifier is able to rectify the AC current and produce a direct current output. The bridge rectifier diode can also be used in other applications, such as converting AC power to DC power and regulating voltage.

In conclusion, the DD170N16SHPSA1 bridge rectifier diode is a versatile and cost-efficient semiconductor device that can be used in a range of applications. Due to its small size and relatively simple design, the bridge rectifier is capable of providing a smooth DC voltage with minimal distortion. Its high surge capability makes it suitable for applications where short-term overloads occur. Furthermore, its minimal power dissipation allows it to be used in high-power applications.

The specific data is subject to PDF, and the above content is for reference