DEA205437BT-1200

RF Filters

A RF filter is an electronic device primarily designed to pass a certain range of frequencies while attenuating frequencies outside of the pass band. This is achieved using one or more electrical circuits, such as low pass filters, high pass filters, or band pass filters, which filter out certain frequencies. The DC-A/G block (DEA205437BT-1200) is one example of such a filter.

Application Field of DEA205437BT-1200

The DC-A/G block (DEA205437BT-1200) is designed specifically for cellular base station receivers. This filter has an insertion loss of 2.5 dB (typical), with a pass-band that ranges from 10.7 GHz to 10.95 GHz, and stop-bands from 9.6 GHz to 10.44 GHz and from 11.14 GHz to 18 GHz. It also has a high Q and a very good rejection in an extremely small package. This filter is generally used in conjunction with a power amplifier for distributing the high level RF signal to a larger group of receiver elements.

Working Principle of DEA205437BT-1200

The DC-A/G block (DEA205437BT-1200) works by filtering out certain frequencies, allowing the desired frequencies to pass through. This is possible thanks to the filter\'s design, which consists of capacitors and inductors connected in series and parallel. The capacitors form RF choke points, which limit the passage of RF signals to certain frequencies. Meanwhile, the inductors act as high pass filters, allowing only frequencies above a certain point to pass. The combination of these two components creates a band pass filter with a very narrow bandwidth between its pass and stop bands. This is what allows the filter to act as a high level of frequency selection.

The DC-A/G block (DEA205437BT-1200) is also designed to work with a phase shifter, which can be used to shift the phase of the incoming signal by a certain degree. This phase shifting creates constructive and destructive interference patterns, increasing the signal-to-noise ratio and ensuring better communication performance. Thanks to this technology, the DEA205437BT-1200 can be used for a wide range of applications, such as cellular base station receivers, wireless systems, or satellite communication systems.