DF06-G

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	600V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 1A
Current - Reverse Leakage @ Vr:	10µA @ 600V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-EDIP (0.321", 8.15mm)
Supplier Device Package:	4-DF
Base Part Number:	DF06

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DF06-G Diodes - Bridge Rectifiers

Diodes - Bridge Rectifiers are used to convert AC (alternating current) to DC (direct current). The DF06-G is a type of Bridge Rectifier that uses four diodes arranged in a “Bridge” configuration. It is an example of a popularly used and widely recognized diode type called a full wave bridge rectifier.

DF06-G Application Field

The DF06-G Bridge Rectifier is commonly used in consumer electronics and other devices that require a DC power source, such as audio amplifiers, automotive alternators, motors, power supplies, and other consumer devices. It is also used in industrial applications, such as robotics, computer systems, and telecommunication equipment. Additionally, the DF06-G is used in many medical applications, such as in medical imaging, clean room equipment and electrical stimulators.

DF06-G Working Principle

The basic principle of the DF06-G Bridge Rectifier is simple. It uses four diodes in an arrangement called a ‘Bridge’, which allows it to take AC from the power source, and rectify it into DC. The four diodes that make up the Bridge are two forward-bias and two reverse-bias; and in combination, they act as a full-wave rectifier. The Bridge Rectifier of this model works by allowing the positive half cycle of the AC power source to flow through the two forward diodes, while the negative half cycle is allowed to pass through the two reverse diodes. This results in a unidirectional current at the output end. A capacitor is used to store energy during the positive half cycles and then releases it during the negative half cycles, thus allowing the output voltage to remain almost constant. Most Bridge Rectifiers have an automatic current limiting feature which prevents the current from exceeding a certain set limit. This prevents the Bridge Rectifier from overloading the circuit or damaging the Bridge Rectifier’s components. It also helps to protect the device from any damage caused by sudden large increases in current or voltage. In addition, the DF06-G Bridge Rectifier has a heat sink attached to it, which helps to dissipate the heat generated by the rectifier, thus increasing its reliability and efficiency. The heat sink also helps to protect the device from any damage due to excessive heat.

Conclusion

The DF06-G Bridge Rectifier is an example of a full wave bridge rectifier, which is widely used in consumer and industrial applications due to its easy installation and cost effectiveness. It is an efficient way to convert AC to DC, and its current limiting feature helps to protect the device and prolong its lifetime. The heat sink attached to the Bridge Rectifier helps to dissipate any heat generated, thus preventing any thermal damage. All of these features makes the DF06-G Bridge Rectifier a popular choice for many devices and applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description