DF1510ST-G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	1kV
Current - Average Rectified (Io):	1.5A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 1.5A
Current - Reverse Leakage @ Vr:	10µA @ 1000V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	4-SMD, Gull Wing
Supplier Device Package:	DFS
Base Part Number:	DF1510

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The DF1510ST-G is a Silicon Bridge Rectifier which is designed for use in power applications. It is often used as a replacement for its predecessors, such as the DF2510S, which are limited in their current ratings and temperature range. The DF1510ST-G is designed to provide optimum performance in a variety of different environments.

Application Field

The DF1510ST-G is suitable for use in single-phase rectification applications. It is often used in power supplies, such as switching power supplies and uninterruptible power supplies, as well as in motor control, DC link circuits, and auxiliary power supplies. It is also used in AC/DC converters, and other AC-to-DC rectification applications. The DF1510ST-G has a maximum peak forward current rating of 1.5A, and a maximum voltage rating of 150V. This makes it ideal for use in a wide range of AC electric power applications.

Working Principle

The DF1510ST-G is a four-pin bridge rectifier. It uses the electrical phenomenon of rectification to convert alternating current (AC) to direct current (DC). Rectification occurs when an electrical device is connected in series with two oppositely-charged electrical terminals. When an alternating current is applied between the two terminals, a one-way current is induced through the device, resulting in a DC voltage output. The DF1510ST-G is constructed from four diodes connected in a bridge configuration. This creates two number pairs that are connected in parallel at each junction point. When a positive voltage is applied to one terminal and a negative voltage to the other, a single-direction current is forced through the device. This allows the bridge rectifier to absorb AC current and output a DC voltage.

Conclusion

The DF1510ST-G is a bridge rectifier, designed for single-phase rectification applications. It has a maximum peak forward current rating of 1.5A, and a maximum voltage rating of 150V. It is ideal for use in power supplies, motor control, DC link circuits, and AC-to-DC conversions. The DF1510ST-G is constructed from four diodes, which allow it to convert alternating current to direct current by the electrical phenomenon of rectification.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description