Allicdata Part #: | DK-621-L933-1P-ND |
Manufacturer Part#: |
DK-621-L933-1P |
Price: | $ 102.03 |
Product Category: | Uncategorized |
Manufacturer: | TE Connectivity Aerospace, Defense and Marine |
Short Description: | DK-621-L933-1P |
More Detail: | N/A |
DataSheet: | DK-621-L933-1P Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 92.75700 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DK-621-L933-1P is a specialized device used by engineers in many different industries. It has a variety of applications in both commercial and residential locations and its working principle is relatively easy to understand.
The DK-621-L933-1P is often used for measuring and controlling temperature in a given environment. It uses a thermistor to detect and measure temperature in its immediate surroundings. The thermistor can be set to take measurements at any given time interval. The readings collected are then used to control the operation of a heater or air conditioning system to ensure the desired temperature set point is achieved and maintained.
DK-621-L933-1P is also used in other applications such as water level sensing, current sensing, or even vibration sensing. It works in a similar way as a thermistor; the device responds to changes in environment around it and can be configured to accurately measure a wide range of conditions. Generally, the signal generated is converted to usable units such as millivolts, volts, or amps which can be monitored and used to trigger a response to a particular condition.
Another application for the DK-621-L933-1P is as a relay or switch. The device is regularly used in combination with an actuator to control the operation of machinery such as pumps or motors. The device reads the signal from the actuator and when a certain condition is reached, the DK-621-L933-1P will cut the power supply to the actuator and stop the operation.
The working principle of the DK-621-L933-1P is a combination of a combination of electrical and mechanical engineering techniques. It uses a thermistor to detect and measure temperature in its immediate vicinity, and a relay to control the operation of machinery. Inside the device, there is a circuit board and a set of sensors or electrodes that are connected together with wires. When the sensors detect a change in temperature or other environmental condition, the signal is then processed by the circuit board inside the device and the desired response is triggered.
The DK-621-L933-1P is an important device for engineers working in various industries as it allows them to measure and control changes in temperature or other parameters which can be used to automate processes, improve efficiency, or increase safety. The device is also reliable and easy to maintain, making it a versatile tool.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE