DKIP-0233-3005

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are a type of cable assembly components used in electronic circuits, and the DKIP-0233-3005 is one such example. This part is usually used as an EMI filter to reduce EMI (electromagnetic interference). It is also used as an interference suppressor or noise suppressor in other applications. Its primary function is to provide frequency dependent impedance to reduce common mode conducted noise.

The DKIP-0233-3005 is a two-stage common mode choke, which consists of two toroid cores, two sets of windings, and two filters. The first stage is a Miniature Inductor, which provides a low-pass filter to reduce a wide range of noise frequencies, while the second stage is a Molded Filter that provides additional filtering capabilities.

The filter performance of the DKIP-0233-3005 is excellent, with very low insertion loss and excellent Common Mode Rejection Ratio (CMRR). For most applications, the S11 of the device is above -60 dB, meaning it will attenuate EMI peaks at very high frequencies. The S12/S21 of the device is also very good, meaning it does not introduce noise into the system.

The DKIP-0233-3005 is a surface mount device, meaning it can easily be installed in a tight space with minimal clearance. It is rated to operate at a temperature of -40°C to +60°C and with an operating voltage of 3.3V and a maximum current of 500mA. The device has an operating frequency of up to 10MHz, making it suitable for applications in the 2.4GHz radio frequency band.

The DKIP-0233-3005 is commonly used in applications where EMI suppression is needed, such as in computers, consumer electronics, and industrial equipment. It can also be used in automotive applications, where it can provide extra EMI filtering protection. It is especially useful in applications where there is a need for high performance filters, such as in radios, navigation systems, and cellular communication.

In conclusion, the DKIP-0233-3005 is a two-stage common mode choke which is designed to reduce EMI in electronic circuits. It is a surface mount device which is rated for temperatures of up to +60°C and with an operating voltage of 3.3V. It offers excellent EMI suppression performance with low insertion loss and high CMRR. Finally, the device is suitable for applications in the radio frequency band and provides superior EMI protection in a variety of applications.

The specific data is subject to PDF, and the above content is for reference