DLF162500LT-5028A1

Series:	*
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Mounting Type:	Surface Mount
Package / Case:	0603 (1608 Metric), 4 PC Pad
Size / Dimension:	0.063" L x 0.032" W (1.60mm x 0.80mm)
Height (Max):	0.016" (0.40mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DLF162500LT-5028A1 RF Filters

RF filters are specialized electronic filters that are used as a passive circuit within electronic and digital equipment. They are designed to be used in a wide range of applications where a signal needs to be filtered out or isolated from other signals. The DLF162500LT-5028A1 is an example of such a filter.The DLF162500LT-5028A1 is a bandpass filter with a center frequency of 1625 MHz. It has a bandwidth of 500 kHz and a passband of +/- 250 kHz from the center frequency. It is designed for use in wideband radio receivers in the 824-960 MHz band. It operates with a low insertion loss and high selectivity, allowing for the cleaning of a signal by removing unwanted noise.The DLF162500LT-5028A1 can be used in a variety of applications, including wireless communications, military and aerospace, broadcast, navigation, instrumentation, and satellite communications. These range from receivers in a wireless network to base station receivers for satellite systems and AM/FM radio broadcasting. It is also compatible with Spread Spectrum Technologies (SST) such as Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS).The filter is relatively low cost and has low power dissipation due to its thin-film construction with a low Q factor. This makes it suitable for portable and battery-operated systems. In addition, the temperature-stable performance of the filter makes it ideal for use in systems with extreme temperature variations.The DLF162500LT-5028A1 is relatively simple to use and install and comes in a convenient size. The device also comes with an SMA connector for easy install and connection.The working principle of the DLF162500LT-5028A1 is based on the basics of low-pass and bandpass filter design principles. Low-pass filters are used to block or reject frequencies above a certain threshold frequency, while bandpass filters are used to allow only a specific frequency range to pass through. In the case of the DLF162500LT-5028A1, the frequency is blocked above 1625 with a bandwidth of 500 kHz and a passband of +/- 250 kHz from the center frequency. This makes the filter useful for applications that require a flat response over a specified bandwidth.In addition, the filter has a high frequency roll-off, allowing for a steep attenuation of signals beyond the center frequency. This is a particularly important feature when trying to reduce interference from strong signals, such as those from cell phone and Wi-Fi networks.The DLF162500LT-5028A1 is an increasingly popular choice for RF filter applications due to its relatively low cost, low power dissipation, and temperature stability. It is suitable for a wide range of applications and is easy to install and use. The filter offers excellent performance, allowing for a clean signal with minimal interference.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description