DM0208LW2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF mixers are one of the most important components of any communication system. They are responsible for the conversion of an electrical signal from one frequency to another. The DM0208LW2 is a high performing RF mixer designed to interconvert frequencies in both receive and transmit modes in both analog and digital applications across the frequency range of 0.5 – 8.0 GHz.

The mixer consists of two ports, one RF input port and one Local Oscillator (LO) input port, and an output port that carries the down-converted signals to the receiver or up-converted signals to the transmitter. The DM0208LW2 offers low insertion loss, high IIP3 and high linearity performance. The dynamic range and gain of this mixer is among the highest available, making it suitable for a wide range of functionality from base stations, terminals, and high-performance communications systems.

The DM0208LW2 has a wide range of applications and can be used in both receive and transmit modes. In the receiver mode, the mixer can be used for down-converting signals from the RF input to the IF (intermediate frequency) output. It can also be used for noise canceling in the transmit mode. The LO port can accept signal from a local oscillator, which can either be a phase-locked loop (PLL) for low noise applications, or an oscillator for higher sensitivity systems.

The DM0208LW2 is a passive RF mixer and works on the principle of conversion loss. This occurs when the LO signal is mixed with the RF signal to obtain the desired frequency or intermediate frequency. The conversion loss of the device is defined as the ratio of the output power at the RF port to the output power at the IF port. The conversion loss of this mixer is typically between 10 and 11 dB. It also features a low noise figure of 12 dB.

The mixer has a linear input and output match of 1 dB, and a flat recall frequency response, which makes it ideal for digital transmissions. It can also provide gain flatness of 6 dB when operated in an ideal environment. Furthermore, it has a low power consumption of about 6 mW, making it ideal for use in low-voltage applications.

The DM0208LW2 is a powerful and versatile RF mixer that can be used in a wide range of applications. It is ideal for base stations, terminals, and high-performance communications systems. It has a low conversion loss, high IIP3 performance, and low insertion loss. It features a low noise figure of 12 dB and a linear input and output match of 1dB. Additionally, the mixer has a flat recall frequency response and features a low power consumption of 6 mW. All these features make the DM0208LW2 an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference