DM74AS874WM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic circuits are used to design digital logic systems used in various applications. These logic circuits are used to implement various mathematical operations, data processing, decision making, and communication between different subsystems within an electronic system. Flip-flops form a class of digital logic circuits that are used in many digital systems. The DM74AS874WM is an example of a flip-flop integrated circuit (IC) that can be used for multiple applications.

The DM74AS874WM is a dual D-type edge-triggered flip-flop IC, and it is offered by the National Semiconductor Corporation. The device contains two D type flip-flops on a single chip. It is designed for use with the 3-state logic family of the TTL series. The DM74AS874WM operates with a minimum supply voltage of 4.5 V and a maximum supply voltage of 5.5 V. The maximum sink and source current of the device is 10mA, and it operates in the temperature range of -40°C to 85°C.

The device has four inputs, namely Data, Clock, Clear, and Master Reset Inputs. The Data input is used to load the flip flops with data. The Clock input is used to control the loading process. When a logic low signal is applied to the clock input, the data in the data input is loaded into the flip-flops. The Clear input is used to clear the flip flops resulting in zero output. The Master Reset input is used to reset the device back to its original state. The device also has four output pins, namely QA and QB, which are the outputs of the flip flops, and QA-bar and QB-bar, which are the inverse outputs of the flip flops.

The working principle of the DM74AS874WM is based on the edge-triggering technique. When a logic low signal is applied to the clock input, the data in the data input is loaded into the flip-flops and latched. Then when a logic high signal is applied to the clock, the data is readable at the outputs of the flip-flops. The DM74AS874WM is a positive edge-triggered device, meaning that the flip-flops will only be set when a positive (rising) clock signal is applied to the clock input. The Clear and Reset inputs are used to control the device’s state and reset the device back to its original state.

The DM74AS874WM is often used in applications where data must be stored and accessed quickly. It is used in communication systems, data processing systems, digital logic systems, and embedded systems. It can also be used in memory systems such as RAM and ROM, as well as in digital computers, microprocessors, and digital signal processing (DSP) systems.

In summary, the DM74AS874WM is a dual D-type edge-triggered flip-flop IC with an operating range of 4.5V to 5.5V. It is used in various digital systems and applications, including communication systems, data processing systems, digital logic systems, embedded systems, memory systems, digital computers, microprocessors, and DSP systems. It works on the edge-triggering technique and is reset and cleared via special inputs.

The specific data is subject to PDF, and the above content is for reference