Allicdata Part #: | DN50A0250R0200-ND |
Manufacturer Part#: |
DN50A0250R0200 |
Price: | $ 82.31 |
Product Category: | RF/IF and RFID |
Manufacturer: | Laird Technologies EMI |
Short Description: | HFR,NICU,PTAF,2XCPSA,RL 25.0MMX2 |
More Detail: | N/A |
DataSheet: | DN50A0250R0200 Datasheet/PDF |
Quantity: | 1000 |
3 +: | $ 74.83140 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RFI and EMI shielding and absorbing materials are used to prevent unwanted electromagnetic and radio frequency interference from entering or exiting certain kinds of electronic equipment. The DN50A0250R0200 is one such material, and it has several benefits and potential uses. This article will explain the application field and working principle of the DN50A0250R0200.
The DN50A0250R0200 is a combination of materials designed to absorb and reflect electromagnetic energy and radio frequencies. The material is constructed using a combination of metal plates, conductive meshes, and non-conductive dielectrics. The metal plates are formed into a cylinder and fitted with the conductive meshes around the circumference. The layers of dielectric materials are inserted between the metal plates, and the layers are sealed using resin or vinyl sealant. This construction is designed to keep the radio frequency energy and the electromagnetic energy inside the mesh instead of radiating or reflecting outwards.
The DN50A0250R0200 is mainly designed for use in applications where radio frequency interference must be controlled. This includes Cellular Base Stations, Mobile Radio Systems, Military Electronics, Aircraft and Impulse Radio Frequency Systems. The material can be used to block out interference from nearby sources, as well as to reduce cross-interference between systems. It can also be used to reduce the amount of interference that an electromagnetic source can generate.
The DN50A0250R0200 works by absorbing radio frequencies and electromagnetic energy that try to pass through it. The conductive meshes absorb the frequencies and convert them into a low-power signal. The dielectric materials then block any further radiation from passing through, thus effectively shielding the inside of the mesh from outside interference. At the same time, the conductive meshes also prevent the electromagnetic energy generated by the system inside the mesh from radiating outwards, thus protecting against interference.
The DN50A0250R0200 is an effective shielding and absorbing material used in a variety of applications. It is lightweight and easy to install, and can be tailored to meet the specific needs of the system it is being used for. It is well-suited for a wide range of military, industrial, and commercial applications, and is an excellent solution for reducing or eliminating electromagnetic interference or radio frequency interference. with sensitive electronics and systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
AP105-DN50-2628P(61) | Hirose Elect... | 114.42 $ | 1000 | TOOL DN50 ACCESSORY |
AP105-DN50-2628P(62) | Hirose Elect... | 114.42 $ | 1000 | TOOL DN50 ACCESSORY |
AP105-DN50-2628P(63) | Hirose Elect... | 85.86 $ | 1000 | TOOL DN50 ACCESSORY |
AP105-DN50-2628P(64) | Hirose Elect... | 85.86 $ | 1000 | TOOL DN50 ACCESSORY |
AP105-DN50-2628P(66) | Hirose Elect... | 90.09 $ | 1000 | TOOL DN50 ACCESSORY |
DN50-2628PC2 | Hirose Elect... | 0.07 $ | 1000 | CONN CRIMP PIN D-SUB 26-2... |
DN50-2628PC1 | Hirose Elect... | 0.12 $ | 1000 | CONN CRIMP PIN D-SUB 26-2... |
DN50-20P | Hirose Elect... | 2.7 $ | 1000 | CONN D-TYPE PLUG CRIMP |
DN50-26P | Hirose Elect... | 3.66 $ | 1000 | CONN D-TYPE PLUG CRIMP |
DN50-50P | Hirose Elect... | 4.06 $ | 1000 | CONN D-TYPE PLUG CRIMP |
DN50-36P | Hirose Elect... | 3.8 $ | 1000 | CONN D-TYPE PLUG CRIMP |
DN50A0250R0200 | Laird Techno... | 82.31 $ | 1000 | HFR,NICU,PTAF,2XCPSA,RL 2... |
DN50-TA2628HC | Hirose Elect... | 544.15 $ | 1000 | TOOL HAND CRIMPER 26-28AW... |
AP105-DN50-2628P | Hirose Elect... | 2.77 $ | 1000 | TOOL PRESS APPLICATOR 26-... |
AP105-DN50-2628P(90) | Hirose Elect... | 107.6 $ | 1000 | TOOL DN50 ACCESSORY |
AP105-DN50-2628P(65) | Hirose Elect... | 62.79 $ | 1000 | TOOL DN50 ACCESSORY |
TAPE POLYMER RESIN 12.7MM 5/PK
SHEET PLYMR RESIN 25.4MM SQ 5/PK
SHEET FABRIC 19.1X101.6MM 100/PK
TAPE FABRIC COPPER 100/PK
FLEX SUPPRESSOR / NOISE SUPPRESS
MF500-117 .625X12X12 ECCOSORB