DP8570AV/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DP8570AV/NOPB stands for Directed Interval Clock (DIC). It can be used in a variety of applications as a real-time clock (RTC) with direct time interval counting capability. This device is a clock-cooled, low power, asynchronous (asymmetrical), frequency-stable, oscillator-controlled clock source. The concept is simple and user-friendly; when power is applied, the oscillator instantaneously starts. The DIC will then count the internal frequency until it reaches the programmed interval, and then it will trigger an interrupt, that will cause the device to stop counting, and go into a standby mode. The device only has to be programmed once, and then it willrepeat the same cycle over and over again, providing accuracy and dependability over a long period of time.

The DP8570AV/NOPB offers an adjustable interrupt interval that ranges from 0ns to 5s, allowing it to function as a real-time clock for various applications. This device also has a sleep mode, which allows it to reduce its power consumption when it is idle, thus consuming less current.

The device is asynchronous, which means it does not use a crystal oscillator. Instead, it uses an oscillator circuit that has an adjustable frequency and can be tuned to the required interval. This technique allows the device to achieve the accuracy of a crystal-controlled clock, but without the complexity or high power consumption.

The main application areas for this device are industrial, automotive, and telecommunication systems where a reliable and accurate clock source is needed to control the timing of circuits and/or to measure time intervals. Another use is as an accurate monitoring system, since the DD8570AV/NOPB can be programmed to interrupt and restart regularly, at predefined intervals.

In addition, this device can be used in medical applications, such as operating theatres, where timing accuracy is crucial. It can also be used in the production and test of time-sensitive products, such as camera shutters and film burners.

The working principle of the DP8570AV/NOPB is relatively simple. When the power is turned on, the oscillator begins oscillating, and the internal counter starts counting. When the counter reaches the predefined interval, an interrupt is triggered, and the device will either enter standby mode or continue counting, depending on the programming of the device. The frequency of the oscillator can be adjusted, allowing the device to precisely measure time intervals over a wide range.

In conclusion, the DP8570AV/NOPB is a versatile and accurate device, capable of performing a wide range of timing applications. The device is suitable for industrial, automotive, and telecommunication systems, as well as medical applications such as operating theatres. Its oscillator-controlled clock provides accuracy and reliable performance over a long period of time.

The specific data is subject to PDF, and the above content is for reference