DPPM10D82K-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors, also known as Polyester, Metalized PET, Mylar, and MKP capacitors, are electrical components used to store energy in an electrical field. These capacitors are generally made up of layers of thin metalized plastic film that is wound into a coil; the layers of film act as insulators for power currents. Film capacitors are often used for noise suppression, signal processing, energy storage, frequency dividing, and voltage regulation.

The DPPM10D82K-F is a film capacitor specifically designed for high frequency AC applications. This capacitor is made up of polyester, and features a small form factor, low ESR, and a large capacitance range. The DPPM10D82K-F is available with a 2.2UF capacitance range, and features an operating temperature range of -55°C to +85°C. This capacitor is ideal for applications such as HVAC, signal processing, communications, and automotive.

The DPPM10D82K-F works by using a thin dielectric coating material, such as polyester, which is then wrapped around a metallic substrate. This provides the components with the necessary insulation needed to provide electricity. The operating frequency of the DC voltage is limited by the characteristics of the capacitor, and both the size and capacitance range of the DPPM10D82K-F provide an ideal combination for applications requiring a DC voltage.

When the DPPM10D82K-F is used in applications that require high frequency AC voltages, the capacitance range is greatly reduced as AC voltage increases. This is due to the fact that the capacitance range is reduced as frequency increases; however, as frequency decreases, the capacitor is designed to maintain a higher capacitance range. The DC voltage applied to the capacitor is limited to the rating of the capacitor, and the voltage must be higher than the rating of the capacitor for proper performance.

The DPPM10D82K-F is designed with a molded body that is impact-resistant, which makes it suitable for use in a variety of adverse conditions. In addition, the capacitor is UL 94V-0 rated, which makes it suitable for use in high-voltage applications. The DPPM10D82K-F is available in three different case sizes, which allows it to be used in a wide range of applications. The design allows the capacitor to run cooler than many other capacitor designs.

The DPPM10D82K-F is a highly reliable film capacitor that is designed for applications requiring a high frequency AC voltage. The DPPM10D82K-F is made of a polyester dielectric, and offers a small form factor, low ESR, and a large capacitance range. The capacitance range is limited as frequency increases, but when utilized for DC voltage applications, the DPPM10D82K-F can be a reliable and effective solution. With its impact-resistant molded body and UL 94V-0 rating, the DPPM10D82K-F is designed to operate reliably in a wide variety of applications, from HVAC to automotive.

The specific data is subject to PDF, and the above content is for reference