DS1856B-050+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

When it comes to digital potentiometers, the DS1856B-050+ is a great example for achieving the best performance and accuracy. The chip is a programmable, digital, nonpersistent, four-channel switch. It\'s a low-power, single-supply deivce with a small footprint (SOT23-5).

The DS1856B-050+ is intended for applications where digital control is preferred over traditional mechanical potentiometers. This eliminates the need for physical adjustments and speeds up the time-to-market. The device can be used in a variety of applications, such as attenuators, audio volume control, LED brightness control, test and measurement equipment, watt-hour meters, process control equipment, and motion control systems.

The device contains four nonvolatile channels and can be programmed to any resistance level. Each of the channels has a resistance range of 50 Ω ±0.1%. The wiper functions can be operated in both unidirectional and bidirectional modes. The unidirectional mode is mainly used to configure the minimum and maximum settings, while the bidirectional mode is used to change the output resistance levels at any time.

The DS1856B-050+ uses a Serial Control Interface (SCI) for programming the wiper settings. The SCI communicates with the host system through the SPI protocol. The device supports the Serial Peripheral Interface (SPI) protocol and operates at speeds up to 10 MHz. It has 16 bits of memory and can store up to 256 programmed settings.

The device also has a comprehensive set of features for minimizing power consumption. It has a low power standby current of 0.5 µA, and a programmable power-down mode, allowing the device to be operated either continuously or on a timed periodic basis. Additionally, the device has an automatic on/off switch-off feature, which enables the device to go to a low power state and turn off itself if it is not used for more than two seconds. Moreover, the device can also be used in power sensitive applications thanks to its low power consumption of 1.1 mA.

The DS1856B-050+ is also equipped with logic inputs and outputs. These logic inputs and outputs support logic functions, such as reset and enable inputs, data ready, and digital lock. Additionally, the device also has a voltage input for a zero-drift reference conditioning function. The logic inputs are 5-volt tolerant.

The DS1856B-050+ is a versatile device that is suitable for a wide range of applications. It is a low power, single-supply device with a small footprint and it is easy to program. It offers a range of features for minimizing power consumption, and it also has high accuracy and stability. It is also suitable for power sensitive applications, and its logic inputs and outputs allow for easy configuration and control. With its wide range of features and robust design, the DS1856B-050+ is the ideal device for high-end digital potentiometer applications.

The specific data is subject to PDF, and the above content is for reference