DS1868BE-050+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition – Digital Potentiometers

The DS1868BE-050+ is a digital potentiometer that has a wide range of uses in data acquisition. It offers users the ability to have full control over the position of the slider in any given application. This makes it an ideal choice for a variety of applications, including the control of motors, speakers, and amplifiers. The DS1868BE-050+ also has the ability to store multiple positions and recall them when needed, allowing it to be used in multiple applications without having to constantly adjust the slider.

The DS1868BE-050+ is a four-bit digital potentiometer, which means that it can store up to sixteen positions (represented in binary by four bits). This allows for a total of sixteen steps between two extreme positions. The slider position is determined by the number of binary digits set on the chip. Each bit can be set to either a one or a zero, which determines the position of the slider. For example, if the first three bits are set to one and the fourth bit is set to zero, the slider would be set to the third position from the left.

The DS1868BE-050+ uses a potentiometer to adjust the slider position. A potentiometer is a type of resister with three contact points that can be adjusted by turning a knob. The resistor is connected to the "+" side and the "-" side of the chip, while the center point is connected to the slider. Changing the resistance of the potentiometer changes the voltage that is sent to the slider, which in turn changes the position of the slider.

In order to use the DS1868BE-050+, there are several necessary components. A power supply must be connected to the chip, which is typically 5V or 3.3V. In some applications, the power may also be provided from the same microcontroller that is controlling the chip. In addition, a microcontroller such as an Arduino is typically used for controlling the chip and retrieving the slider position.

The DS1868BE-050+ has a wide range of applications in data acquisition. It is easy to use, accurate and can be used to control the position of a motor, speaker or amplifier. It can also be used to store multiple positions and recall them when required, allowing for the adjustment of multiple elements without having to repeatedly adjust the slider.

The DS1868BE-050+ is a reliable digital potentiometer that is capable of providing precision control over the position of the slider in any given application. It is an excellent choice for a variety of data acquisition applications, offering the user the flexibility to store multiple positions and recall them when needed.

The specific data is subject to PDF, and the above content is for reference