DS90CR283MTD/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DS90CR283MTD/NOPB is an extremely versatile high-speed serializer/deserializer (SERDES) system on a chip (SOIC) interface devices. It is designed to offer an effective interface solution for applications that require high data rate, low jitter and low power consumption. This extremely versatile device consists of three primary components: a digital SERDES, a high-speed transceiver and a multiplexer. The SERDES, transceiver and multiplexer are all capable of supporting a variety of protocols and tend to be found in niche applications. In this article, we will discuss the application fields and working principle of the DS90CR283MTD/NOPB.

The DS90CR283MTD/NOPB is commonly used in a variety of high-speed serial applications. It can support single-ended differential signaling with low bit error rate (BER) for transmission rates up to 8.5 Gbps, and has an operating temperature range of -40 °C to +85 °C. Therefore, it can be used for applications such as HDMI 2.1, InfiniBand, and USB3.1/3.2. Moreover, it can be used in military, video imaging, robotics, industrial, medical, and automotive applications.

In addition, the DS90CR283MTD/NOPB has a very low power consumption of less than 200mW. This makes it very suitable for applications that require a low power solution. Furthermore, the device has a very low jitter and is capable of supporting a variety of complex clocking schemes. Finally, it includes several digital and analog control registers, as well as connection status sensing. This allows for ease of use and a much simpler integration than would be required for an ASIC solution.

The working principle of the DS90CR283MTD/NOPB is relatively straightforward. All of the major components discussed above are connected via a single clock line. The main clock signal is sent from the master device to the multiplexer, which then passes it on to the SERDES and transceiver. The SERDES then uses the clock signal to transmit and receive data. This data is then passed on to the multiplexer, which switches between different channels as needed. The multiplexer then relays the data to the transceiver, which then sends it out to the host system.

The main serializer/deserializer, the SERDES, is a digital-to-analog converter. It takes in digital data, converts it to an analog signal, and then sends it out. The SERDES also receives the data from the transceiver, converts it back to digital, and passes it on to the multiplexer. The transceiver is the device responsible for sending and receiving the data from the host system. Finally, the multiplexer switches between multiple communication channels, allowing for a flexible connection.

In summary, the DS90CR283MTD/NOPB is an extremely versatile high-speed serializer/deserializer interface device. It is constructed of three main components: a digital SERDES, a high-speed transceiver, and a multiplexer. It is primarily used in applications such as HDMI 2.1, InfiniBand, and USB3.1/3.2, and due to its low power consumption and jitter levels it is suitable for a variety of applications. The working principle of the device is relatively straightforward: all of the major components are connected via a single clock line. The main clock signal is sent from the master device to the multiplexer, which then passes it on to the SERDES and transceiver. The SERDES then uses the clock signal to transmit and receive data. Finally, the multiplexer switches between different channels as needed. This allows for flexibility and a simplified integration.

The specific data is subject to PDF, and the above content is for reference